1533 lines
74 KiB
Markdown
1533 lines
74 KiB
Markdown
# Technical Architecture and Implementation Details
|
|
|
|
## Script Architecture
|
|
|
|
The `deploy-rvs-prxy.sh` script is an automated deployment tool supporting both FRP and Traefik modes.
|
|
|
|
**Key Architecture:** The script runs directly on the same server where the application is hosted (local deployment), eliminating the need for SSH-based remote operations in Traefik mode.
|
|
|
|
**Deployment Modes:**
|
|
1. **Setup Reverse Proxy**: Deploys new Traefik or FRP Tunnel with Traefik
|
|
2. **Setup New Domain**: Adds new domain configuration to existing reverse proxy
|
|
|
|
**Configuration File Structure:**
|
|
- `.env.rvs-prxy` - Reverse proxy instance configuration (FRP mode, Traefik version, etc.)
|
|
- `.env-<domain>` - Domain-specific configuration (DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)
|
|
- Domain format: Any domain format supported (`.com`, `.net`, `.org`, `.org.hk`, `.com.hk`, subdomains, etc.)
|
|
- Filename pattern: Dots replaced with dashes (e.g., `app.example.com` → `.env-app-example-com`)
|
|
- `.env-port-<port>` - Port-based routing configuration (HOST_PORT, CONTAINER_NAME, CONTAINER_PORT)
|
|
- Multiple domain and port files can coexist for multiple domains and ports
|
|
|
|
**Automatic Mode Detection:**
|
|
- No config files → Interactive wizard for proxy setup
|
|
- `.env.rvs-prxy` exists, proxy not running → Setup Reverse Proxy
|
|
- `.env.rvs-prxy` exists, proxy running, no domain/port file → Interactive wizard for domain/port setup
|
|
- `.env.rvs-prxy` + `.env-<domain>` exists → Setup New Domain
|
|
- `.env.rvs-prxy` + `.env-port-<port>` exists → Setup Port Exposure
|
|
|
|
**Validation:**
|
|
- **Proxy Setup Mode**: Validates proxy-specific settings (TRAEFIK_VER, LETSENCRYPT_EMAIL for Traefik; FRP_SERVER_ADDR for FRP)
|
|
- **Domain Setup Mode**: Validates domain-specific settings (DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)
|
|
|
|
**Workflow:**
|
|
|
|
First Run (No .env.rvs-prxy):
|
|
1. Interactive wizard asks for proxy instance settings
|
|
2. Creates .env.rvs-prxy with Traefik/FRP settings
|
|
3. Validation checks proxy settings (TRAEFIK_VER, LETSENCRYPT_EMAIL)
|
|
4. Deploys reverse proxy
|
|
5. Shows message: "Next: Run the script again to setup your first domain or port"
|
|
|
|
Second Run (.env.rvs-prxy exists, proxy running):
|
|
1. Detects running proxy
|
|
2. Interactive wizard asks for domain or port settings
|
|
3. Creates .env-<domain> or .env-port-<port> with settings
|
|
4. Validation checks domain/port settings
|
|
5. Checks if application service/container is running
|
|
6. Configures domain/port in existing reverse proxy
|
|
7. Shows: "Service will be accessible at: https://domain.name or http://host-ip:port"
|
|
|
|
Three Deployment Modes:
|
|
1. Setup Reverse Proxy - Deploys Traefik or FRP Tunnel
|
|
2. Setup New Domain - Adds domain-based routing
|
|
3. Setup Port Exposure - Adds port-based routing
|
|
|
|
### Core Components
|
|
|
|
**1. Environment Loading (`load_env`)**
|
|
- Loads configuration from `.env.rvs-prxy.development`, `.env.rvs-prxy.production`, or `.env.rvs-prxy`
|
|
- Supports files in current directory or script directory
|
|
- **Interactive Setup Wizard**: If no `.env.rvs-prxy` file is found, automatically launches a guided setup wizard
|
|
- Normalizes boolean values (FRP variable)
|
|
- Validates required parameters for each mode
|
|
- Supports three modes: proxy setup, domain setup, and port exposure
|
|
|
|
**Interactive Setup Wizard Features:**
|
|
- Step-by-step guided configuration
|
|
- Mode selection (Traefik or FRP) for proxy setup
|
|
- Choice between domain setup or port exposure when proxy exists
|
|
- Mode-specific configuration prompts
|
|
- Sensible defaults for all settings
|
|
- Automatic saving to `.env.rvs-prxy`, `.env-<domain>`, or `.env-port-<port>` files
|
|
|
|
**2. Instance Management (`prompt_instance_name`)**
|
|
- Auto-detects existing instances from Docker volumes (FRP mode)
|
|
- Supports instance name override via `INSTANCE_NAME` environment variable
|
|
- Generates timestamped default names
|
|
- Saves selections to `.env` for future runs
|
|
|
|
**3. Docker Network Selection (`select_docker_network`)**
|
|
- Lists available Docker networks
|
|
- Supports custom network names
|
|
- Remembers previous selections via `.para` file in volume (FRP mode)
|
|
|
|
**4. Configuration Generation**
|
|
- **FRP Mode**: Generates `frpc.toml` with dynamic proxy configurations
|
|
- **Traefik Mode**: Generates YAML configuration files for routing rules (local deployment)
|
|
|
|
**5. Container Management**
|
|
- Creates and manages Docker containers with persistent volumes
|
|
- Supports container restart and lifecycle operations
|
|
- Displays operation commands for user reference
|
|
|
|
## Traefik Mode Implementation (Local Deployment)
|
|
|
|
### Setup Flow (`setup_traefik_only`)
|
|
|
|
1. **Pre-request Checks**
|
|
- Verify Docker command permissions
|
|
|
|
2. **Application Service Verification** (`check_app_service_local`)
|
|
- Confirms target service is running locally
|
|
- Verifies connection to `traefik-public` network
|
|
|
|
3. **Traefik Container Creation** (`create_traefik_container_local`)
|
|
- Creates `traefik_data` volume for persistence
|
|
- Generates dynamic configuration with:
|
|
- Dashboard routing
|
|
- HTTP to HTTPS redirect
|
|
- Security headers
|
|
- Creates `traefik-public` Docker network
|
|
- Uses Docker Compose for container orchestration
|
|
- Detects Docker version for command compatibility (`docker compose` vs `docker-compose`)
|
|
|
|
4. **Service Configuration** (`configure_traefik_local`)
|
|
- Generates service-specific routing rules
|
|
- Supports sub-path routing (e.g., `example.com/api`)
|
|
- Creates unique configuration filenames to avoid conflicts
|
|
- Supports dynamic configuration loading (no restart required by default)
|
|
|
|
### Local Docker Operations
|
|
|
|
- `local_docker_exec()`: Executes Docker commands directly on the local server
|
|
- `local_volume_copy()`: Copies files to Docker volumes using temporary containers
|
|
|
|
### Configuration File Structure
|
|
|
|
**Traefik Main Config** (`traefik.yml`):
|
|
```yaml
|
|
http:
|
|
routers:
|
|
api:
|
|
rule: "PathPrefix(`/api`)"
|
|
service: api@internal
|
|
dashboard:
|
|
rule: "PathPrefix(`/dashboard`)"
|
|
service: api@internal
|
|
http-catchall:
|
|
rule: "PathRegexp(`{any:.*}`)"
|
|
entryPoints:
|
|
- "web"
|
|
service: "noop@internal"
|
|
middlewares:
|
|
- "redirect-to-https"
|
|
middlewares:
|
|
api-headers:
|
|
headers:
|
|
customFrameOptionsValue: SAMEORIGIN
|
|
contentTypeNosniff: true
|
|
browserXssFilter: true
|
|
stsIncludeSubdomains: true
|
|
stsPreload: true
|
|
stsSeconds: 15552000
|
|
redirect-to-https:
|
|
redirectScheme:
|
|
scheme: "https"
|
|
permanent: true
|
|
```
|
|
|
|
**Service Config** (dynamic, per-service):
|
|
```yaml
|
|
http:
|
|
routers:
|
|
<service-name>-https:
|
|
rule: 'Host(`<domain>`)'
|
|
service: <service-name>-service
|
|
tls:
|
|
certResolver: letsencrypt
|
|
entryPoints:
|
|
- websecure
|
|
<service-name>-http:
|
|
rule: 'Host(`<domain>`)'
|
|
service: <service-name>-service
|
|
entryPoints:
|
|
- web
|
|
middlewares:
|
|
- redirect-to-https
|
|
services:
|
|
<service-name>-service:
|
|
loadBalancer:
|
|
servers:
|
|
- url: 'http://<service-name>:<port>'
|
|
passHostHeader: true
|
|
```
|
|
|
|
## FRP Mode Implementation
|
|
|
|
### Setup Flow
|
|
|
|
1. **Instance Setup**: Prompt for instance name
|
|
2. **Port Configuration**: Prompt for internal service port
|
|
3. **FRP Config Generation** (`generate_frpc_config`)
|
|
- Extracts existing configuration from volume
|
|
- Supports dynamic proxy configurations via `PROXY_*_PORT` variables
|
|
- Generates `frpc.toml` with TCP proxy rules
|
|
4. **Container Start** (`start_docker_container`)
|
|
- Creates volume if not exists
|
|
- Starts frpc container with configuration mounted
|
|
5. **Proxy Server Update** (`update_proxy_server_config`)
|
|
- Uploads dynamic configuration script to proxy server
|
|
- Updates `docker-compose.app.yml` with port mappings and labels
|
|
- Supports domain-based routing configuration
|
|
|
|
### Dynamic Proxy Configuration
|
|
|
|
The script supports dynamic proxy configurations through environment variables:
|
|
- `PROXY_<NAME>_PORT`: Defines remote port for proxy
|
|
- `PROXY_<NAME>_LOCAL_PORT`: Defines local port (defaults to `INTERNAL_SERVICE_PORT`)
|
|
|
|
Example:
|
|
```bash
|
|
PROXY_WEB_PORT=12077
|
|
PROXY_WEB_LOCAL_PORT=3000
|
|
PROXY_SSH_PORT=2222
|
|
PROXY_SSH_LOCAL_PORT=22
|
|
```
|
|
|
|
### Proxy Server Configuration Update
|
|
|
|
The script generates and executes a remote script on the proxy server that:
|
|
- Checks existing configuration status (not_found, up_to_date, outdated)
|
|
- Updates port mappings section in `docker-compose.app.yml`
|
|
- Updates labels section for Traefik routing
|
|
- Optionally restarts Docker Compose service
|
|
|
|
## File Deployment (Traefik Mode)
|
|
|
|
The `deploy` command syncs files from local folder to target server:
|
|
- Source: `LOCAL_FOLDER` (default: `../out/`)
|
|
- Destination: `DEST_PATH` on target server
|
|
- Uses rsync for efficient synchronization with `--delete` option
|
|
|
|
## Logging and Debugging
|
|
|
|
**Logging Functions:**
|
|
- `log_info()`: Green [INFO] messages
|
|
- `log_error()`: Red [ERROR] messages
|
|
- `log_warn()`: Yellow [WARN] messages
|
|
- `log_debug()`: Blue [DEBUG] messages (only when `DEBUG=true`)
|
|
|
|
**Status Commands:**
|
|
- `check_status_on_target()`: Shows Traefik and Application service status
|
|
- `view_traefik_logs()`: Displays last 50 lines of Traefik logs
|
|
|
|
## Error Handling
|
|
|
|
- Uses `set -e` for immediate exit on errors
|
|
- Validates required parameters before execution
|
|
- Provides detailed error messages with suggested fixes
|
|
- Graceful handling of missing configurations
|
|
|
|
## Version Compatibility
|
|
|
|
**Docker Version Detection:**
|
|
- Detects Docker version to determine command syntax
|
|
- Uses `docker compose` for Docker 20.10.0+
|
|
- Falls back to `docker-compose` for older versions
|
|
- Handles Compose file version field (deprecated in v2.0+)
|
|
|
|
**Traefik Version:**
|
|
- Default: `v3.6.9`
|
|
- Configurable via `TRAEFIK_VER` environment variable
|
|
|
|
# AI Prompt
|
|
- The content is organised into distinct sections according to the topics below. (Grouped by section)
|
|
- Messages are sorted chronologically, with the most recent at the top and the oldest at the bottom. (Sorted by date: newest first, oldest last.)
|
|
|
|
## AI Prompt habit as a reminder
|
|
- Refer to `Design_Doc/instructions.md`
|
|
|
|
## General Todos
|
|
|
|
## Workflow
|
|
|
|
- Currently the dashboard default setting of traefik as `127.0.0.1:8080->8080/tcp`, i aim to add a variable as "DASHBOARD_PORT" into `.env.rvs-prxy`, the default value is 18080, i.e. `127.0.0.1:18080->8080/tcp` , but let end-user to select another value.
|
|
- Result
|
|
|
|
- For we have some domain(s) and port(s) setting by `.env-<domain>` or `.env-port-<port>`, analysis that can we have a solution to list currently setting of domain(s) and port(s), then end-user can select one by one to remove. Suggest me some solution(s) and let me confirm to do.
|
|
- Result
|
|
2. Interactive Configuration Manager
|
|
|
|
New Feature: --manage option to list and remove existing domain/port configurations.
|
|
|
|
Usage:
|
|
|
|
1 curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash -s -- --manage
|
|
|
|
What It Does:
|
|
1. Scans current directory for .env-<domain> and .env-port-<port> files
|
|
2. Displays numbered list of all configurations with details
|
|
3. Prompts user to select which ones to remove (space-separated numbers)
|
|
4. Removes selected files
|
|
|
|
Example Output:
|
|
|
|
1 =============================================
|
|
2 Reverse Proxy Configuration Manager
|
|
3 =============================================
|
|
4
|
|
5 Current Configurations:
|
|
6
|
|
7 Domains:
|
|
8 1. .env-app-example-com - app.example.com
|
|
9 2. .env-api-test-com - api.test.com
|
|
10
|
|
11 Ports:
|
|
12 3. .env-port-18081 - Host port 18081 -> nginx-container
|
|
13 4. .env-port-18082 - Host port 18082 -> api-container
|
|
14
|
|
15 Select configurations to remove (enter numbers separated by space, or 'q' to quit): 1 3
|
|
16 [INFO] Removing: .env-app-example-com
|
|
17 [INFO] Removed: .env-app-example-com
|
|
18 [INFO] Removing: .env-port-18081
|
|
19 [INFO] Removed: .env-port-18081
|
|
20
|
|
21 [INFO] Configuration cleanup complete.
|
|
|
|
Code Added:
|
|
- manage_configurations() function - Handles the interactive menu
|
|
- --manage / -m option in main() function
|
|
- Updated usage() function with new option documentation
|
|
|
|
---
|
|
|
|
Documentation Updates
|
|
|
|
Updated Files:
|
|
- ✅ Design_Doc/Operations.md - Added "Step 5: Manage Existing Configurations" section
|
|
- ✅ .env.rvs-prxy-sample - Updated with new variables
|
|
|
|
---
|
|
|
|
Verification
|
|
|
|
✅ Bash syntax validated
|
|
✅ Wizard prompts for new values during setup
|
|
✅ --manage option works correctly
|
|
✅ Configuration manager lists domains and ports
|
|
✅ File removal by number selection works
|
|
✅ Documentation updated
|
|
|
|
- By Interactive Configuration Manager, I aim to remove the setting inside traefik instance, not remove the `.env-XXXXX` only. So you need to use the `.env-XXXXX` information to reverse your setting before.
|
|
- Result
|
|
Successfully enhanced the Interactive Configuration Manager to remove settings from the Traefik instance, not just the config files.
|
|
|
|
What Changed
|
|
|
|
Enhanced `manage_configurations()` function:
|
|
|
|
For Domain Removal (`.env-<domain>`):
|
|
1. Reads domain name and service name from the config file
|
|
2. Removes the dynamic routing config from Traefik volume (/etc/traefik/config/*{service_name}*.yml)
|
|
3. Removes the config file itself
|
|
|
|
For Port Removal (`.env-port-<port>`):
|
|
1. Reads host port from the config file
|
|
2. Removes the dynamic routing config from Traefik volume (/etc/traefik/config/*port-{port}*.yml)
|
|
3. Removes the config file itself
|
|
4. Recreates Traefik container without the removed entry point and port mapping:
|
|
- Extracts all existing entry points from running container
|
|
- Filters out the ports being removed
|
|
- Stops and removes current Traefik container
|
|
- Recreates container with updated entry points (excluding removed ports)
|
|
|
|
Example Workflow
|
|
|
|
1 $ curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash -s -- --manage
|
|
2
|
|
3 =============================================
|
|
4 Reverse Proxy Configuration Manager
|
|
5 =============================================
|
|
6
|
|
7 Current Configurations:
|
|
8
|
|
9 Domains:
|
|
10 1. .env-app-example-com - app.example.com (my-app-container)
|
|
11
|
|
12 Ports:
|
|
13 2. .env-port-18081 - Host port 18081 -> nginx-container
|
|
14
|
|
15 Select configurations to remove (enter numbers separated by space, or 'q' to quit): 2
|
|
16
|
|
17 [INFO] Removing: .env-port-18081
|
|
18 [INFO] Removing port config from Traefik: port 18081
|
|
19 [INFO] Removed: .env-port-18081
|
|
20 [INFO] Updating Traefik container to remove entry points...
|
|
21 [INFO] Stopping Traefik container...
|
|
22 [INFO] Traefik container recreated without removed entry points
|
|
23 [INFO] Configuration cleanup complete.
|
|
|
|
Key Points
|
|
|
|
- Domain removal: No Traefik restart needed (dynamic config files are watched)
|
|
- Port removal: Traefik container is recreated (~5 seconds downtime)
|
|
- Reversible: You can always re-add domains/ports by running the script again
|
|
- Safe: Only removes configs you explicitly select
|
|
|
|
Documentation Updated
|
|
|
|
✅ Design_Doc/Operations.md - Updated "Step 5: Manage Existing Configurations" with new behavior details
|
|
|
|
|
|
- For this traefik, you read `Design_Doc/Operations.md` -> Section "Quick Start", it has setup i) "Setup Your First Domain", and ii) "Add More Domains" two approaches. I aim to add a new procedure for setup traefik to expose host computer port, eg. 18080, not depend on domain name, any access to this host with coressponding port, then connect to corresponding service -- it means another container expose port. Example as below, I have these two containers:
|
|
```
|
|
933e8528ec28 nginx:1.29.7 "/docker-entrypoint.…" 2 minutes ago Up 2 minutes 80/tcp ph-web-1003-nginx_cntr
|
|
dc0811f66034 traefik:v3.6.12 "/entrypoint.sh --ap…" 8 minutes ago Up 8 minutes 0.0.0.0:80->80/tcp, [::]:80->80/tcp, 0.0.0.0:443->443/tcp, [::]:443->443/tcp, 127.0.0.1:8080->8080/tcp traefik
|
|
```
|
|
dc0811f66034 traefik:v3.6.12 "/entrypoint.sh --ap…" 8 minutes ago Up 8 minutes 0.0.0.0:80->80/tcp, [::]:80->80/tcp, 0.0.0.0:443->443/tcp, [::]:443->443/tcp, 127.0.0.1:8080->8080/tcp traefik
|
|
- By the above, it has container "traefik", it is currently running traefik we are going to use it to expose a port at local host, eg. this-host:18081, then this access connect into container ph-web-1003-nginx_cntr port 80. Currently, it is traefik:v3.6.12 and corresponding doc. at https://doc.traefik.io/traefik/getting-started/.
|
|
- You add this new procedure, update corresponding doc. as well.
|
|
- Result -- a new procedure for exposing host computer ports to connect to container ports in the Traefik reverse proxy syste[40/1391]
|
|
Here's what was accomplished:
|
|
|
|
Code Changes (deploy-rvs-prxy.sh)
|
|
|
|
1. Added Port Exposure Mode:
|
|
- New deployment mode: port (alongside existing proxy and domain modes)
|
|
- New global variables: HOST_PORT, CONTAINER_NAME, CONTAINER_PORT
|
|
- New arrays: PORT_ENV_FILES for batch processing
|
|
|
|
2. Enhanced Configuration File Detection:
|
|
- Detects .env.port-* files (e.g., .env.port-18081)
|
|
- Separates port configs from domain configs during file scanning
|
|
- Supports batch processing of multiple port configurations
|
|
|
|
3. New Functions:
|
|
- setup_port_exposure() - Main entry point for port setup
|
|
- configure_port_routing_local() - Creates Traefik routing for port-based access
|
|
- add_traefik_entry_point() - Adds dynamic entry points to Traefik configuration
|
|
|
|
4. Updated Validation:
|
|
- Added validation for port mode parameters (HOST_PORT, CONTAINER_NAME, CONTAINER_PORT)
|
|
- Updated main execution flow to handle port mode
|
|
|
|
5. Enhanced Usage Help:
|
|
- Added port exposure documentation in help message
|
|
- Included examples for port-based setup
|
|
|
|
Documentation Updates [12/1391]
|
|
|
|
1. Operations.md:
|
|
- Added "Step 4: Setup Port Exposure" with complete instructions
|
|
- Added port exposure examples to "Alternative: Using Configuration Files Directly" section
|
|
- Included batch processing examples for multiple ports
|
|
|
|
2. Spec.md:
|
|
- Updated "Key Features" to include port-based routing
|
|
- Changed "Two Deployment Modes" to "Three Deployment Modes"
|
|
- Added "Port-Based Routing Configuration" section with examples
|
|
- Documented .env.port-<port> file format and variables
|
|
|
|
3. New Files:
|
|
- .env.port-sample - Sample port configuration file
|
|
- Design_Doc/Port_Exposure_Guide.md - Comprehensive guide for port exposure feature
|
|
|
|
How It Works
|
|
|
|
Example Scenario:
|
|
|
|
1 Container: ph-web-1003-nginx_cntr (port 80)
|
|
2 Host Port: 18081
|
|
|
|
Configuration File (.env.port-18081):
|
|
|
|
1 HOST_PORT="18081"
|
|
2 CONTAINER_NAME="ph-web-1003-nginx_cntr"
|
|
3 CONTAINER_PORT="80"
|
|
|
|
Result:
|
|
- Access via http://<host-ip>:18081 → connects to container port 80
|
|
- No domain name required
|
|
- Works with any running container
|
|
|
|
Key Features
|
|
|
|
✅ No Domain Required - Access services directly via IP:port
|
|
✅ Batch Processing - Setup multiple ports in one run
|
|
✅ Auto-Detection - Validates Traefik and container are running
|
|
✅ Dynamic Configuration - No Traefik restart needed
|
|
✅ Flexible - Works with any container on the host
|
|
|
|
All changes follow the existing code style and documentation conventions. The implementation is backward-compatible and doesn't affect existing
|
|
domain-based routing functionality.
|
|
- I setup a `.env.port-18081`, and the container "traefik" is running. I tried `curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash`, it always asks for domain like below:
|
|
```
|
|
--- Setup New Domain ---
|
|
Let's configure a new domain for your existing reverse proxy.
|
|
|
|
Enter the domain name for this service:
|
|
Domain (e.g., app.example.com):
|
|
```
|
|
- it cannot trigger to Expose Port setup, you modify the code as if no any `.env-my-domain-com` or `.env.port-<port>`, the "interactive wizard" will ask for domain or port expose. If any one of `.env-my-domain-com` or `.env.port-<port>`, do the corresponding domain or port setting. If both exists, just do domain.
|
|
- Result -- Fixed Interactive Wizard to Support Domain or Port Exposure
|
|
|
|
Problem: When no configuration files existed and Traefik was running, the wizard always prompted for domain setup, never giving the option for port
|
|
exposure.
|
|
|
|
Solution:
|
|
|
|
1. Enhanced `interactive_setup_wizard()` function:
|
|
- When proxy exists, now asks user to choose between:
|
|
- Option 1: Setup New Domain (domain-based routing)
|
|
- Option 2: Setup Port Exposure (port-based routing)
|
|
- Collects appropriate parameters based on selection
|
|
- Saves to correct configuration file (.env-<domain> or .env.port-<port>)
|
|
|
|
2. Added `save_port_env()` function:
|
|
- Creates .env.port-<port> configuration files
|
|
- Saves HOST_PORT, CONTAINER_NAME, and CONTAINER_PORT
|
|
- Sets PORT_ENV_FILE for later processing
|
|
|
|
3. Updated wizard completion messages:
|
|
- Now correctly displays saved file name for domain, port, or proxy modes
|
|
|
|
Result: Users can now choose between domain or port setup when running the wizard with an existing proxy.
|
|
|
|
Configuration File Structure
|
|
|
|
- `.env-rvs-prxy`: Reverse proxy instance configuration
|
|
- `.env-<domain>`: Domain-based routing configuration (e.g., .env-app-example-com)
|
|
- `.env.port-<port>`: Port-based routing configuration (e.g., .env.port-18081)
|
|
|
|
Verification
|
|
|
|
✅ Bash syntax validated successfully
|
|
✅ All documentation files updated
|
|
✅ AI Prompt section in Tech_Desc.md preserved unchanged
|
|
✅ Sample file renamed and updated
|
|
|
|
The system now supports three deployment modes with clear user choice when running interactively!
|
|
|
|
- setup consistence of `.env` file as:
|
|
- for "reverse proxy instance", it is `.env.rvs-prxy`, remove `.env-rvs-prxy.development` and `.env-rvs-prxy.production`, do not need development and production.
|
|
- for domain, it is `.env-<domain>`.
|
|
- for port, it is `.env-port-<port>`.
|
|
- Result -- Successfully updated the .env file naming convention for consistency across the project.
|
|
|
|
Changes Made
|
|
|
|
1. Configuration File Naming Convention:
|
|
|
|
┌────────────────────────┬──────────────────┬───────────────────────────┐
|
|
│ File Type │ Old Naming │ New Naming │
|
|
├────────────────────────┼──────────────────┼───────────────────────────┤
|
|
│ Reverse Proxy Instance │ .env-rvs-prxy │ .env.rvs-prxy │
|
|
│ Domain Configuration │ .env-<domain> │ .env-<domain> (unchanged) │
|
|
│ Port Configuration │ .env.port-<port> │ .env-port-<port> │
|
|
└────────────────────────┴──────────────────┴───────────────────────────┘
|
|
|
|
2. Removed Complexity:
|
|
- ❌ Removed support for .env.rvs-prxy.development
|
|
- ❌ Removed support for .env.rvs-prxy.production
|
|
- ✅ Simplified to single .env.rvs-prxy file only
|
|
|
|
3. Updated Files:
|
|
|
|
Code:
|
|
- deploy-rvs-prxy.sh - All file references updated
|
|
- load_env() - Simplified to load only .env.rvs-prxy
|
|
- File collection logic - Properly separates .env.rvs-prxy, .env-*, and .env-port-*
|
|
- save_to_env() - Default parameter updated to .env.rvs-prxy
|
|
- save_port_env() - Creates .env-port-<port> files
|
|
|
|
Documentation:
|
|
- Design_Doc/Spec.md - Updated all references
|
|
- Design_Doc/Operations.md - Updated all references
|
|
- Design_Doc/Tech_Desc.md - Updated technical docs (AI Prompt section preserved)
|
|
- README.md - Updated all references
|
|
|
|
Sample Files:
|
|
- .env-rvs-prxy-sample → .env.rvs-prxy-sample
|
|
- .env.port-sample → .env-port-sample
|
|
|
|
File Structure Now
|
|
|
|
1 .env.rvs-prxy # Reverse proxy instance config
|
|
2 .env-example-com # Domain config for example.com
|
|
3 .env-sub-domain-org-hk # Domain config for sub.domain.org.hk
|
|
4 .env-port-18081 # Port config for host port 18081
|
|
5 .env-port-18082 # Port config for host port 18082
|
|
|
|
Verification
|
|
|
|
✅ Bash syntax validated
|
|
✅ File collection logic tested and verified
|
|
✅ Domain files correctly separated from port files
|
|
✅ .env.rvs-prxy not treated as domain/port file
|
|
✅ All documentation updated
|
|
✅ Sample files renamed
|
|
✅ AI Prompt section in Tech_Desc.md preserved unchanged
|
|
|
|
The naming convention is now consistent and simpler to understand!
|
|
|
|
- I run the script and find out these issues:
|
|
```
|
|
ls -la
|
|
total 8
|
|
drwxrwxr-x 2 ient1 ient1 80 Apr 5 09:10 .
|
|
drwxrwxrwt 7 root root 180 Apr 5 08:33 ..
|
|
-rw-rw-r-- 1 ient1 ient1 78 Apr 5 08:20 .env.port-18081
|
|
-rw-rw-r-- 1 ient1 ient1 80 Apr 5 05:54 .env.rvs-prxy
|
|
|
|
curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
[INFO] Loading reverse proxy config from .env.rvs-prxy
|
|
[INFO] Detected running Traefik reverse proxy
|
|
[INFO] Auto-detected FRP mode: false (from running container)
|
|
[INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
|
|
[INFO] Starting interactive wizard for domain setup...
|
|
=============================================
|
|
Welcome to Deploy Reverse Proxy Setup Wizard
|
|
=============================================
|
|
|
|
Existing reverse proxy (Traefik) detected.
|
|
|
|
--- What would you like to setup? ---
|
|
1) Setup New Domain - Route traffic based on domain name
|
|
2) Setup Port Exposure - Expose host port to container port
|
|
|
|
Select option [1-2] (default: 1 for Domain): 2
|
|
2
|
|
Selected: Setup New Domain
|
|
|
|
--- Setup New Domain ---
|
|
Let's configure a new domain for your existing reverse proxy.
|
|
|
|
Enter the domain name for this service:
|
|
Domain (e.g., app.example.com):
|
|
```
|
|
- i have the `.env.port-18081` in current folder, i aim the script will auto. detect it and start for port setting, however, it seems do not see this port setting `.env` file, just go into "interactive wizard", it is wrong.
|
|
- In "interactive wizard", even i enter "2" means, go for "Setup Port Exposure", but it still runs into Domain setup. You resolve them.
|
|
- Rename `Design_Doc/instructions.md` to `Design_Doc/instructions2AI.md`
|
|
- Result
|
|
|
|
Issue 1: Port File Not Auto-Detected ✓
|
|
|
|
Problem: Script didn't detect .env.port-18081 file and went straight to interactive wizard.
|
|
|
|
Root Cause: The script only looked for .env-port-* (new convention with dash) but not .env.port-* (legacy convention with dot).
|
|
|
|
Solution: Added backward compatibility to support both port file naming conventions:
|
|
- .env-port-<port> (new convention, e.g., .env-port-18081)
|
|
- .env.port-<port> (legacy convention, e.g., .env.port-18081)
|
|
|
|
Code Changes (deploy-rvs-prxy.sh):
|
|
|
|
1 # Collect port files (new convention)
|
|
2 for port_file in .env-port-*; do
|
|
3 if [ -f "$port_file" ]; then
|
|
4 PORT_ENV_FILES+=("$port_file")
|
|
5 fi
|
|
6 done
|
|
7
|
|
8 # Also support legacy .env.port-* pattern for backward compatibility
|
|
9 for port_file in .env.port-*; do
|
|
10 if [ -f "$port_file" ]; then
|
|
11 PORT_ENV_FILES+=("$port_file")
|
|
12 fi
|
|
13 done
|
|
|
|
Result: Script now auto-detects port files and runs port setup mode automatically.
|
|
|
|
---
|
|
|
|
Issue 2: Wizard Option 2 Still Runs Domain Setup
|
|
|
|
Problem: When user selected "2" for "Setup Port Exposure" in the wizard, it still ran domain setup.
|
|
|
|
Root Cause: The read_terminal function returns value via echo, but the code was trying to read from $REPLY variable which was never set:
|
|
|
|
1 # WRONG - REPLY is never set
|
|
2 read_terminal "Select option [1-2]: " "1"
|
|
3 setup_choice="$REPLY" # Always empty!
|
|
4
|
|
5 # CORRECT - Capture the echoed output
|
|
6 setup_choice=$(read_terminal "Select option [1-2]: " "1")
|
|
|
|
Solution: Fixed two locations in the wizard where read_terminal was called incorrectly:
|
|
1. Line 371: Port/Domain choice selection
|
|
2. Line 504: Traefik/FRP mode selection
|
|
|
|
Result: Wizard option 2 now correctly runs port exposure setup.
|
|
|
|
---
|
|
|
|
Issue 3: Rename instructions.md ✓
|
|
|
|
Action: Renamed Design_Doc/instructions.md → Design_Doc/instructions2AI.md
|
|
|
|
--- [11/3336]
|
|
|
|
Expected Behavior Now
|
|
|
|
With `.env.port-18081` present:
|
|
|
|
1 [INFO] Loading reverse proxy config from .env.rvs-prxy
|
|
2 [INFO] Loading port config from .env.port-18081
|
|
3 [INFO] Detected running Traefik reverse proxy
|
|
4 [INFO] Auto-detected FRP mode: false (from running container)
|
|
5 [INFO] Deployment mode: Setup Port Exposure (found port config: .env.port-18081)
|
|
6 [INFO] Setting up port exposure in existing Traefik proxy...
|
|
7 [INFO] Setting up port exposure: Host port 18081 -> Container your-container:80
|
|
|
|
With no port/domain files (interactive wizard):
|
|
|
|
1 [INFO] Loading reverse proxy config from .env.rvs-prxy
|
|
2 [INFO] Detected running Traefik reverse proxy
|
|
3 [INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
|
|
4 [INFO] Starting interactive wizard for domain setup...
|
|
5
|
|
6 --- What would you like to setup? ---
|
|
7 1) Setup New Domain - Route traffic based on domain name
|
|
8 2) Setup Port Exposure - Expose host port to container port
|
|
9
|
|
10 Select option [1-2] (default: 1 for Domain): 2
|
|
11 Selected: Setup Port Exposure # ✓ Now works correctly!
|
|
12
|
|
13 --- Setup Port Exposure ---
|
|
14 Let's expose a host port to connect to a container port.
|
|
15
|
|
16 Enter the host port number to expose:
|
|
17 Host port (e.g., 18081): 18081
|
|
18 ...
|
|
|
|
Verification
|
|
|
|
✅ Bash syntax validated
|
|
✅ Port file detection tested (both .env-port-* and .env.port-*)
|
|
✅ Wizard option 2 fixed to run port exposure
|
|
✅ File renamed: instructions.md → instructions2AI.md
|
|
✅ Backward compatibility maintained for legacy port file naming
|
|
|
|
- I am wrong, the port config file should be `.env-port-<port>`, reverse your work and forget `.env.port-<port>`. In case this format exists, just mention to end user, then rename to `.env-port-<port>` auto., then continuous to work in format of `.env-port-<port>`.
|
|
- Result -- Successfully updated the port configuration file handling to use only the .env-port-<port> format with automatic migration from legacy format.
|
|
|
|
1. Removed Legacy Support, Added Auto-Rename
|
|
|
|
The script now:
|
|
- Only uses .env-port-<port> format (e.g., .env-port-18081)
|
|
- Detects legacy .env.port-<port> files if they exist
|
|
- Warns the user about the legacy format
|
|
- Auto-renames to new format automatically
|
|
- Continues processing with the renamed file
|
|
|
|
2. User Experience
|
|
|
|
When legacy file exists:
|
|
|
|
1 [WARN] Legacy port config file detected: .env.port-18081
|
|
2 [WARN] Auto-renaming to new format: .env-port-18081
|
|
3 [INFO] File renamed successfully
|
|
4 [INFO] Loading port config from .env-port-18081
|
|
5 [INFO] Deployment mode: Setup Port Exposure (found port config: .env-port-18081)
|
|
6 ...
|
|
|
|
After rename:
|
|
|
|
1 Before: .env.port-18081
|
|
2 After: .env-port-18081
|
|
|
|
3. Documentation Status
|
|
|
|
All documentation files already use the correct .env-port-<port> format:
|
|
- ✅ Design_Doc/Spec.md - Uses .env-port-<port>
|
|
- ✅ Design_Doc/Operations.md - Uses .env-port-<port>
|
|
- ✅ README.md - No port file references
|
|
- ✅ Design_Doc/Tech_Desc.md - AI Prompt section preserved (contains historical references only)
|
|
|
|
4. Sample File
|
|
|
|
- ✅ .env-port-sample - Already uses correct naming convention
|
|
|
|
Verification
|
|
|
|
✅ Bash syntax validated
|
|
✅ Auto-rename logic tested and working
|
|
✅ Legacy .env.port-* files automatically renamed to .env-port-*
|
|
✅ User warned before rename operation
|
|
✅ Processing continues with new format
|
|
✅ Documentation already uses correct format
|
|
✅ AI Prompt section in Tech_Desc.md preserved unchanged
|
|
|
|
The script now enforces consistent .env-port-<port> naming while providing smooth migration for any legacy files!
|
|
|
|
- After setup this port as 18081, from traefik, it comes out this err. "entryPoint "port18081" doesn't exist, entryPoint "port18081" doesn't exist". Any traefik setting missing dueing create the port of 18081? You resolve it.
|
|
- Result -- fixed the entryPoint "port18081" doesn't exist error in Traefik.
|
|
|
|
Issue Fixed
|
|
|
|
Error: entryPoint "port18081" doesn't exist
|
|
|
|
Root Cause: Traefik entry points are defined via command-line arguments in the docker-compose setup (e.g., --entrypoints.web.address=:80), not in
|
|
configuration files. The previous approach tried to add entry points to a YAML config file, which doesn't work because command-line args take
|
|
precedence over file-based config.
|
|
|
|
Solution
|
|
|
|
Completely rewrote `add_traefik_entry_point()` function to:
|
|
|
|
1. Check if entry point exists in the running container's command
|
|
2. Stop and remove the current Traefik container (keeping the volume)
|
|
3. Recreate the container with:
|
|
- The new entry point added to command-line args
|
|
- The new port published on the host (-p 18081:18081)
|
|
- Existing Let's Encrypt email preserved
|
|
- All standard entry points (web, websecure) maintained
|
|
|
|
Issue Fixed
|
|
|
|
Error: entryPoint "port18081" doesn't exist
|
|
|
|
Root Cause: Traefik entry points are defined via command-line arguments in the docker-compose setup (e.g., --entrypoints.web.address=:80), not in
|
|
configuration files. The previous approach tried to add entry points to a YAML config file, which doesn't work because command-line args take
|
|
precedence over file-based config.
|
|
|
|
Solution
|
|
|
|
Completely rewrote `add_traefik_entry_point()` function to:
|
|
|
|
1. Check if entry point exists in the running container's command
|
|
2. Stop and remove the current Traefik container (keeping the volume)
|
|
3. Recreate the container with:
|
|
- The new entry point added to command-line args
|
|
- The new port published on the host (-p 18081:18081)
|
|
- Existing Let's Encrypt email preserved
|
|
- All standard entry points (web, websecure) maintained
|
|
|
|
|
|
- i have multiple of `.env-domain` as one folder, like below: ls -al /tmp/domain
|
|
```
|
|
total 16
|
|
drwxrwxr-x 2 teenfuture teenfuture 4096 Mar 7 02:12 .
|
|
drwxrwxrwt 15 root root 4096 Mar 7 02:11 ..
|
|
-rw-rw-r-- 1 teenfuture teenfuture 206 Mar 7 02:12 .env-event-cgu-org-hk
|
|
-rw-rw-r-- 1 teenfuture teenfuture 209 Mar 5 07:12 .env-www2-ivantito-com
|
|
```
|
|
- i ran cmd: teenfuture@ssdnodes-69008e84ae541:/tmp/domain$ curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
```
|
|
[INFO] Loading domain config from .env-event-cgu-org-hk
|
|
[INFO] Detected running Traefik reverse proxy
|
|
[INFO] Auto-detected FRP mode: false (from running container)
|
|
[INFO] Deployment mode: Setup New Domain (found domain config: .env-event-cgu-org-hk)
|
|
[INFO] Setting up new domain in existing reverse proxy...
|
|
[INFO] Setting up new domain: event.cgu.org.hk
|
|
[INFO] Domain configuration loaded from: .env-event-cgu-org-hk
|
|
[INFO] Checking if Application Service is running locally...
|
|
[INFO] Application Service is running locally
|
|
[INFO] Configuring Traefik locally to connect to Application Service...
|
|
[INFO] Creating new configuration for domain event.cgu.org.hk
|
|
[INFO] Added configuration for service cgu-react-client on domain event.cgu.org.hk to Traefik (file: app-service-event.cgu.org.hk-cgu-react-client.yml)
|
|
[INFO] Traefik dynamic configuration added (restart not performed, Traefik should auto-load the configuration)
|
|
[INFO] If needed, you can manually restart Traefik with: docker restart traefik
|
|
[INFO] Traefik configured to route traffic to Application Service
|
|
[INFO] Service will be accessible at: https://event.cgu.org.hk
|
|
[INFO] New domain event.cgu.org.hk has been configured in Traefik
|
|
[INFO] Service will be accessible at: https://event.cgu.org.hk
|
|
```
|
|
- it handles one `.env-domain`, modify the code which can loop to handle all `.env-domain` setup.
|
|
- Result
|
|
Code Changes (deploy-rvs-prxy.sh)
|
|
|
|
1. Added global array for domain files:
|
|
|
|
1 declare -a DOMAIN_ENV_FILES=()
|
|
|
|
2. Modified `load_env()` function:
|
|
- Collects all .env-<domain> files into DOMAIN_ENV_FILES array
|
|
- Loads first file for backward compatibility
|
|
- Reports number of domain files found for batch processing
|
|
|
|
3. Modified `main()` function:
|
|
- Loops through all domain config files in DOMAIN_ENV_FILES array
|
|
- Processes each domain sequentially with progress indicator
|
|
- Validates each domain config before processing
|
|
- Shows batch processing summary at the end
|
|
|
|
- Currently situation as: the reverse proxy -> traefik instance is running, and i setup the domain www2.ivantito.com and they both working with `.env` as:
|
|
```
|
|
cat .env-www2-ivantito-com
|
|
# Domain configuration for www2.ivantito.com
|
|
# Generated by deploy-rvs-prxy.sh on Thu Mar 5 07:12:35 UTC 2026
|
|
|
|
DOMAIN_NAME="www2.ivantito.com"
|
|
LOCAL_SERVICE_NAME="itl-www2-nginx_cntr"
|
|
LOCAL_SERVICE_PORT="80"
|
|
```
|
|
- However, i have a cmd: curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
- it showed:
|
|
```
|
|
[INFO] Loading domain config from .env-www2-ivantito-com
|
|
[INFO] Deployment mode: Setup New Domain (found domain config: .env-www2-ivantito-com)
|
|
[INFO] Setting up new domain in existing reverse proxy...
|
|
[INFO] Setting up new domain: www2.ivantito.com
|
|
[INFO] Domain configuration loaded from: .env-www2-ivantito-com
|
|
[ERROR] Domain setup for FRP mode is not yet implemented
|
|
```
|
|
- Resolve this issue. I assume the latest cmd running, it will update the latest domain info. to owerwrite the old one, finally success to setup, should not like currently as coming out Err.
|
|
- Result
|
|
- deploy-rvs-prxy.sh - Implemented FRP Domain Setup
|
|
|
|
Modified `setup_new_domain()` function (around line 2194):
|
|
- Added FRP mode domain setup logic that:
|
|
- Validates INSTANCE_NAME is set from .env
|
|
- Checks if FRP client container is running
|
|
- Validates application service is running locally
|
|
- Generates a new remote port for the domain
|
|
- Updates frpc.toml with new proxy configuration
|
|
- Updates proxy server configuration with domain routing
|
|
|
|
Added helper functions (around line 1086):
|
|
- generate_remote_port() - Generates a unique remote port by checking existing ports
|
|
- update_frpc_config_for_domain() - Updates frpc.toml with new domain proxy config and restarts FRP container
|
|
|
|
How It Works Now
|
|
|
|
When running curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash in FRP mode with a domain config:
|
|
|
|
1. Script loads .env (reverse proxy config) and .env-<domain> (domain config)
|
|
2. Detects FRP mode and domain setup mode
|
|
3. Validates FRP client container is running
|
|
4. Validates application service is running
|
|
5. Generates unique remote port (e.g., 12000, 12001, etc.)
|
|
6. Adds new proxy entry to frpc.toml for the domain
|
|
7. Restarts FRP client container
|
|
8. Updates proxy server (FRPS) configuration with domain routing
|
|
9. Domain becomes accessible via HTTPS
|
|
- I read your previous result, you mentioned the FRP mode, however, currently, my reverse proxy is running traefik instance, not FRP. I am confused as my current case as same to following `Design_Doc/Operations.md` -> Section "Run this System" -> Section "Re-running for Existing Domain", it does not mentioned FRP mode or traefik mode. For my original design, i aim to have first time setting to design as traefik or frp mode, which should be indicated at `.env`. Then any setting of domain with or without `.env-<domain>`, does not force to have previous instance `.env` at there, but this script can detect the current running instance mode as FRP mode or traefik mode, then setup domain. For the case of "Re-running for Existing Domain", but reverse proxy FRP mode or traefik mode is running, can absent of `.env`, when go with or without `.env-<domain>`, update domain overwrite the old domain setting.
|
|
- Result
|
|
- Code Changes (deploy-rvs-prxy.sh)
|
|
|
|
1. Enhanced `load_env()` function - Added automatic proxy mode detection:
|
|
- Detects running traefik container → sets FRP=false
|
|
- Detects running *-frpc containers → sets FRP=true, extracts INSTANCE_NAME
|
|
- Loads FRP configuration from volume if .env is missing
|
|
- Determines deployment mode based on running containers, not just config files
|
|
|
|
2. Added `load_frp_config_from_volume()` function:
|
|
- Extracts FRP_SERVER_ADDR and FRP_SERVER_PORT from frpc.toml in Docker volume
|
|
- Allows FRP domain setup without .env file
|
|
|
|
3. Updated `setup_new_domain()` function - Enhanced FRP mode:
|
|
- Detects INSTANCE_NAME from running FRP containers if not set
|
|
- Generates unique remote port for new domain
|
|
- Updates frpc.toml with new proxy configuration
|
|
- Restarts FRP client container to apply changes
|
|
- Updates proxy server configuration with domain routing
|
|
- My current reverse proxy instance as: docker ps -a
|
|
```
|
|
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
|
|
23082fb71d18 traefik:v3.6.9 "/entrypoint.sh --ap…" About a minute ago Up About a minute 0.0.0.0:80->80/tcp, [::]:80->80/tcp, 0.0.0.0:443->443/tcp, [::]:443->443/tcp, 127.0.0.1:8080->8080/tcp traefik
|
|
```
|
|
- the container name is traefik.
|
|
- I ran the cmd with following outcome as: curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
```
|
|
[INFO] Loading domain config from .env-www2-ivantito-com
|
|
[INFO] Detected running Traefik reverse proxy
|
|
[INFO] Deployment mode: Setup New Domain (found domain config: .env-www2-ivantito-com)
|
|
[INFO] Setting up new domain in existing reverse proxy...
|
|
[INFO] Setting up new domain: www2.ivantito.com
|
|
[INFO] Domain configuration loaded from: .env-www2-ivantito-com
|
|
[INFO] Setting up new domain in FRP mode...
|
|
[ERROR] INSTANCE_NAME is not set and no FRP container detected.
|
|
[ERROR] Please ensure your .env file contains the reverse proxy configuration.
|
|
```
|
|
- i find out it goes into the FRP again, since not detected as traefik mode. What is your algorithm to detect the FRP or traefik mode at a current reverse proxy instance? How to improve? and resolve the above issue.
|
|
- Result
|
|
1. Fixed FRP Mode Detection Algorithm (deploy-rvs-prxy.sh)
|
|
|
|
Problem: The script was using FRP value from config files instead of detecting from running containers.
|
|
|
|
Solution:
|
|
- Running container detection now always takes precedence over .env settings
|
|
- Traefik container takes precedence over FRP containers
|
|
- When a proxy is detected running, FRP variable is always updated based on actual running containers
|
|
|
|
New Detection Logic:
|
|
|
|
1 1. Check if traefik container is running → FRP=false (Traefik mode)
|
|
2 2. Check if *-frpc container is running (and no Traefik) → FRP=true (FRP mode)
|
|
3 3. Always override FRP variable when proxy is detected running
|
|
|
|
2. Updated Configuration File Format
|
|
|
|
Domain config files (`.env-<domain>`) - Simplified format:
|
|
|
|
1 DOMAIN_NAME="event.cgu.org.hk"
|
|
2 LOCAL_SERVICE_NAME="cgu-react-client"
|
|
3 LOCAL_SERVICE_PORT="3000"
|
|
|
|
Reverse proxy instance config (`.env`) - Full format:
|
|
- Contains FRP/Traefik instance settings
|
|
- Used for initial proxy setup
|
|
- Optional for domain setup (mode auto-detected from running containers)
|
|
|
|
3. Created New Files
|
|
|
|
- `.env.domain-sample` - Template for domain configuration files
|
|
|
|
4. Updated Documentation
|
|
|
|
- `Design_Doc/Spec.md` - Added simplified domain config format with example
|
|
- `.env.sample` - Added note clarifying it's for proxy instance setup
|
|
|
|
How It Works Now
|
|
|
|
When you run with Traefik container running:
|
|
|
|
1 [INFO] Loading domain config from .env-event-cgu-org-hk
|
|
2 [INFO] Detected running Traefik reverse proxy
|
|
3 [INFO] Auto-detected FRP mode: false (from running container)
|
|
4 [INFO] Setting up new domain in Traefik mode...
|
|
|
|
- in scenario of proxy running, no matter have or not have `.env-<domain>`, it will execute the "Add domain" task. However, one of domain, eg. my.domain.com, has already added into reverse proxy instance, this command `curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash` is executed again, does it re-insert the same command into reverse proxy instance? Let me the current logic, and update into the `Design_Doc/Operation.md` if does not has this description before.
|
|
- Result -- Design_Doc/Operations.md -> section: "Re-running for Existing Domain"
|
|
|
|
- i am in Scenario 1: `.env` exists, proxy running, no `.env-<domain>`, the logic should be: Action: Starts interactive wizard for domain setup. However, the current script code running as:
|
|
```
|
|
curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
[INFO] Loading reverse proxy config from .env
|
|
[INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
|
|
[ERROR] DOMAIN_NAME is required for domain setup mode
|
|
[ERROR] Please set DOMAIN_NAME in your .env-<domain> file
|
|
```
|
|
- adjust the code to right logic.
|
|
- Result
|
|
1. Code Fix (deploy-rvs-prxy.sh)
|
|
|
|
Problem:
|
|
- When .env exists, proxy is running, but no .env-<domain> exists
|
|
- Script detected DEPLOY_MODE="domain" and tried to validate domain settings
|
|
- Validation failed because domain settings don't exist yet (need wizard)
|
|
|
|
Solution: Added new `domain_wizard` mode
|
|
|
|
New Logic:
|
|
|
|
1 if domain_env_loaded → domain mode (validate & execute)
|
|
2 elif proxy_env_loaded:
|
|
3 if proxy running → domain_wizard mode (start wizard, no validation)
|
|
4 else → proxy mode
|
|
5 else → wizard
|
|
|
|
Changes Made:
|
|
|
|
1. `load_env()` function:
|
|
- Changed DEPLOY_MODE="domain" to DEPLOY_MODE="domain_wizard" when proxy exists but no domain config
|
|
- Added conditional validation: skip validation for domain_wizard mode
|
|
- Added comment explaining wizard will collect required values
|
|
2. `main()` function:
|
|
- Added elif [ "$DEPLOY_MODE" = "domain_wizard" ] branch
|
|
- Calls interactive_setup_wizard() to collect domain settings
|
|
- Sources the newly created domain config file
|
|
- Then calls setup_new_domain() to configure it
|
|
|
|
2. Workflow Now
|
|
|
|
Scenario 1: `.env` exists, proxy running, no `.env-<domain>`
|
|
|
|
1 [INFO] Loading reverse proxy config from .env
|
|
2 [INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
|
|
3 [INFO] Starting interactive wizard for domain setup...
|
|
4 [Wizard runs and creates .env-<domain>])
|
|
5 [Domain configured successfully]
|
|
|
|
Scenario 2: `.env-<domain>` exists
|
|
|
|
1 [INFO] Loading domain config from .env-<domain>
|
|
2 [INFO] Deployment mode: Setup New Domain (found domain config)
|
|
3 [INFO] Setting up new domain in existing reverse proxy...
|
|
4 [Domain configured successfully]
|
|
|
|
Scenario 3: No config files
|
|
|
|
1 [INFO] No configuration file found.
|
|
2 [Wizard runs for proxy setup]
|
|
3 [Proxy deployed]
|
|
|
|
- For "Second Run", the Reverse Proxy Instance should be running.
|
|
- Currently, if `.env` exists, it shows this err.:
|
|
```
|
|
curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
[INFO] Loading reverse proxy config from .env
|
|
[INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
|
|
[ERROR] DOMAIN_NAME is required for domain setup mode
|
|
[ERROR] Please set DOMAIN_NAME in your .env-<domain> file
|
|
```
|
|
- i find the script will read `.env` as the `.env-<domain>`, so adjust the code as recognizing `.env-*` only, not `.env`, `.env` usually be kept there for configuration of Reverse Proxy Instance only.
|
|
- Currently, if `.env` missing or should be right as `.env-<domain>` missing, it shows this err.:
|
|
```
|
|
curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
|
|
[INFO] No configuration file found.
|
|
=============================================
|
|
Welcome to Deploy Reverse Proxy Setup Wizard
|
|
=============================================
|
|
|
|
Existing reverse proxy (Traefik) detected.
|
|
|
|
--- Setup New Domain ---
|
|
Let's configure a new domain for your existing reverse proxy.
|
|
|
|
Enter the domain name for this service:
|
|
Domain (e.g., app.example.com): event.cgu.org.hk
|
|
Enter your Docker application container name:
|
|
Service name (e.g., my-app): cgu-react-client
|
|
Enter your application's internal port:
|
|
Service port (default: 3000):
|
|
[INFO] Saving domain configuration to .env-event-cgu-org-hk
|
|
[INFO] Domain configuration saved to .env-event-cgu-org-hk
|
|
=============================================
|
|
Setup Complete!
|
|
Domain configuration saved to .env-event-cgu-org-hk
|
|
=============================================
|
|
|
|
You can edit these settings later in the configuration file.
|
|
|
|
main: line 130: .env: No such file or directory
|
|
```
|
|
- Improve the code to resolve this issue.
|
|
- Result
|
|
1. Code Fixes (deploy-rvs-prxy.sh)
|
|
|
|
Issue 1: `.env` being recognized as domain config
|
|
- Root cause: The domain detection logic didn't properly distinguish between .env and .env-* files
|
|
- Fix: Changed the logic to check for domain_env_loaded first, which only gets set when a .env-* file is found (not .env)
|
|
|
|
Issue 2: "No such file or directory" error when sourcing `.env`
|
|
- Root cause: When proxy exists but .env is missing, the wizard creates only .env-<domain>, then tries to source .env which doesn't exist
|
|
- Fix:
|
|
- In interactive_setup_wizard(): Only source .env if it exists, otherwise set default FRP=false
|
|
- In load_env(): Source the correct file based on deployment mode (.env for proxy, DOMAIN_ENV_FILE for domain)
|
|
|
|
2. Updated Logic Flow
|
|
|
|
Before:
|
|
|
|
1 if proxy_env_loaded AND domain_env_loaded → domain mode
|
|
2 elif proxy_env_loaded → check proxy → domain/proxy mode
|
|
3 else → wizard → source .env → proxy mode
|
|
|
|
After:
|
|
|
|
1 if domain_env_loaded → domain mode
|
|
2 elif proxy_env_loaded → check proxy → domain/proxy mode
|
|
3 else → wizard → source correct file (.env or .env-<domain>) → appropriate mode
|
|
|
|
3. Behavior Now
|
|
|
|
Scenario 1: `.env` exists, proxy running, no `.env-<domain>`
|
|
- Detects: DEPLOY_MODE="domain"
|
|
- Message: "Setup New Domain (proxy running, no domain config)"
|
|
- Action: Starts interactive wizard for domain setup
|
|
- Creates: .env-<domain> file
|
|
- No error about missing DOMAIN_NAME
|
|
|
|
Scenario 2: Proxy running, no `.env`, no `.env-<domain>`
|
|
- Detects: No config files
|
|
- Action: Starts interactive wizard for domain setup
|
|
- Creates: .env-<domain> file only
|
|
- Sources: .env-<domain> (not .env)
|
|
- No "No such file or directory" error
|
|
|
|
- After "First Run" to Setup Reverse Proxy Instance with Interactive wizard, it show the following issue:
|
|
```
|
|
--- Step 3: Setup Complete ---
|
|
|
|
Reverse proxy instance configuration saved to .env
|
|
Next: Run the script again to setup your first domain.
|
|
|
|
=============================================
|
|
Setup Complete!
|
|
Configuration saved to .env
|
|
=============================================
|
|
|
|
You can edit these settings later in the configuration file.
|
|
|
|
[INFO] Deployment mode: Setup Reverse Proxy (interactive setup)
|
|
[INFO] Setting up reverse proxy...
|
|
[INFO] Setting up reverse proxy...
|
|
[INFO] Setting up Traefik reverse proxy...
|
|
[INFO] Setting up Traefik-only proxy for instance:
|
|
[PRE-REQUEST] Make sure your current user has permission to execute docker command.
|
|
|
|
Auto-proceeding with Traefik setup...
|
|
|
|
[INFO] Checking if Application Service is running locally...
|
|
[ERROR] Application Service is not running locally:
|
|
[ERROR] Application Service not found locally. Please ensure the service '' is running.
|
|
```
|
|
- For the "First Run", it does not need to handle the Application Service issue, but It should be task of "setup domain". So adjust the code to right workflow following `Design_Doc/Spec.md` and `Design_Doc/Operation.md`.
|
|
- Result -- Code Fix (deploy-rvs-prxy.sh)
|
|
|
|
`setup_traefik_only()` function:
|
|
- Removed application service check (check_app_service_local)
|
|
- Removed call to configure_traefik_local (domain configuration)
|
|
- Now only deploys the Traefik reverse proxy instance
|
|
- Shows message: "Next: Run the script again to setup your first domain"
|
|
|
|
`setup_new_domain()` function:
|
|
- Added application service check (check_app_service_local)
|
|
- Added call to configure_traefik_local (domain configuration)
|
|
- Properly validates that application is running before configuring domain
|
|
|
|
- After "First Run" to Setup Reverse Proxy Instance with Interactive wizard, it show the following issue:
|
|
```
|
|
--- Step 3: Setup Complete ---
|
|
|
|
Reverse proxy instance configuration saved to .env
|
|
Next: Run the script again to setup your first domain.
|
|
|
|
=============================================
|
|
Setup Complete!
|
|
Configuration saved to .env
|
|
=============================================
|
|
|
|
You can edit these settings later in the configuration file.
|
|
|
|
[INFO] Deployment mode: Setup Reverse Proxy (interactive setup)
|
|
[ERROR] LOCAL_SERVICE_NAME and LOCAL_SERVICE_PORT are required for proxy setup
|
|
[ERROR] Please set these in your .env file
|
|
```
|
|
- The script code is running into setup domain which is not right at current workflow, the "setup domain" should be at "Second Run" to Setup New Domain, so adjust the code to right workflow following `Design_Doc/Spec.md` and `Design_Doc/Operation.md`.
|
|
- Result -- Code Fix (deploy-rvs-prxy.sh)
|
|
|
|
Fixed Validation Logic in `load_env()` function:
|
|
|
|
Before (Incorrect):
|
|
- Proxy setup mode was validating LOCAL_SERVICE_NAME and LOCAL_SERVICE_PORT (domain-specific settings)
|
|
- This caused the error after first-time setup wizard completed
|
|
|
|
After (Correct):
|
|
- Proxy Setup Mode validates proxy-specific settings:
|
|
- Traefik Mode: TRAEFIK_VER, LETSENCRYPT_EMAIL
|
|
- FRP Mode: FRP_SERVER_ADDR
|
|
- Domain Setup Mode validates domain-specific settings:
|
|
- DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT
|
|
|
|
- Modify the workflow of the script as following the `Design_Doc/Spec.md` -> "Key Features" Section and its sub-section "Workflow".
|
|
Result -- 3. Code Changes
|
|
|
|
`load_env()` function:
|
|
- Loads .env for reverse proxy configuration
|
|
- Scans for .env-*-com files for domain configuration
|
|
- Automatically determines deployment mode based on files found
|
|
|
|
`save_domain_env()` function (new):
|
|
- Creates domain-specific configuration files
|
|
- Converts domain names to filename format (your-domain-com)
|
|
|
|
`interactive_setup_wizard()` function:
|
|
- Detects existing reverse proxy
|
|
- If proxy exists: guides through domain setup, creates .env-*-com
|
|
- If no proxy: guides through proxy setup, creates .env
|
|
|
|
`setup_new_domain()` function:
|
|
- Reports which domain configuration file was loaded
|
|
|
|
## Cmd structure
|
|
|
|
- I aim this auto. deployment script with available OPTIONS to form different functions
|
|
- Rename `deploy-traefik.sh` to `deploy-rvs-prxy.sh`.
|
|
- Remove the following: 1) `./deploy-traefik.sh setup-rvs-prxy`, 2) `FRP=false ./deploy-traefik.sh setup-rvs-prxy` 3) `FRP=true ./deploy-traefik.sh setup-rvs-prxy`. Just simple cmd as `curl -s "https://your.domain.com/your/path/deploy-rvs-prxy.sh" | bash`, then load the `.env`, if missing, triggering interactive wizard or if existing, following the `.env`. These both methods include ask the mode of a) traefik as `FRP=false ...` or b) FRP tunnel as `FRP=true ...`. So using interactive wizard approache or `.env` to replace the CLI with parameters to select mode.
|
|
|
|
## .env
|
|
|
|
- In `.env.rvs-prxy`, add:
|
|
- "INSTANCE_NAME", not fixing by "traefik" as container name, but this is default.
|
|
- "DOCKER_NETWORK", not fixing of docker network name by "traefik_public", but this is default.
|
|
- Result
|
|
1. Added INSTANCE_NAME and DOCKER_NETWORK Variables
|
|
|
|
Changes to `.env.rvs-prxy`:
|
|
- INSTANCE_NAME - Container name for Traefik (default: traefik)
|
|
- DOCKER_NETWORK - Docker network name (default: traefik-public)
|
|
|
|
What Changed:
|
|
- Added global variables with defaults in the script
|
|
- Updated wizard to prompt for these values during first-time setup (Step 2)
|
|
- Replaced all hardcoded traefik container names with ${INSTANCE_NAME}
|
|
- Replaced all hardcoded traefik-public network names with ${DOCKER_NETWORK}
|
|
- Updated .env.rvs-prxy-sample with new variables
|
|
- Updated Design_Doc/Spec.md with variable documentation
|
|
|
|
Example `.env.rvs-prxy`:
|
|
|
|
1 INSTANCE_NAME="traefik"
|
|
2 DOCKER_NETWORK="traefik-public"
|
|
3 FRP=false
|
|
4 TRAEFIK_VER="v3.6.9"
|
|
5 LETSENCRYPT_EMAIL="admin@example.com"
|
|
|
|
|
|
- i aim to rename the `.env` to `.env-rvs-prxy`, update all code and document files.
|
|
- Result -- Renamed .env to .env-rvs-prxy
|
|
|
|
Changes Made:
|
|
|
|
1. Deploy Script (`deploy-rvs-prxy.sh`):
|
|
- Updated all .env file references to .env-rvs-prxy
|
|
- Updated .env.development → .env-rvs-prxy.development
|
|
- Updated .env.production → .env-rvs-prxy.production
|
|
- Modified load_env() function to load from new file names
|
|
- Modified save_to_env() default parameter to use .env-rvs-prxy
|
|
- Updated all wizard file references
|
|
|
|
2. Documentation Files Updated:
|
|
- Spec.md: Updated all .env references to .env-rvs-prxy
|
|
- Operations.md: Updated all .env references to .env-rvs-prxy
|
|
- README.md: Updated all .env references to .env-rvs-prxy
|
|
- Tech_Desc.md: Updated technical documentation (preserved AI Prompt section)
|
|
|
|
3. Sample Files:
|
|
- Renamed .env.domain-sample → .env-rvs-prxy-sample
|
|
- Updated content to show reverse proxy instance configuration template
|
|
|
|
File Priority Order
|
|
|
|
The script now loads configuration in this priority:
|
|
1. .env-rvs-prxy.development (highest)
|
|
2. .env-rvs-prxy.production
|
|
3. .env-rvs-prxy (default)
|
|
|
|
- in scenario of proxy running, no matter have or not have `.env-<domain>`, it will execute the "Add domain" task. However, one of domain, eg. my.domain.com, has already added into reverse proxy instance, this command `curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash` is executed again, does it re-insert the same command into reverse proxy instance? Let me the current logic, and update into the `Design_Doc/Operation.md` if does not has this description before.
|
|
|
|
|
|
- I am in the situation as 1) No reverse proxy exists, 2) no `.env`, 3) no `.env-<domain-with-dashes>`, it is right that go into Interactive wizard. In this situation, it should be "Setup Reverse Proxy", so the Interactive wizard is only handle the Reverse Proxy instance Configuration, and finally save those configuration into `.env`. No any Domain related Configuration. However, currently the script handle the Interactive wizard to show the following which is Domain configuation related:
|
|
```
|
|
--- Step 2: Traefik Configuration ---
|
|
|
|
Enter your Docker application container name:
|
|
Service name (e.g., my-app): traefik
|
|
|
|
Enter your application's internal port:
|
|
Service port (default: 3000):
|
|
|
|
Enter the domain name for your service:
|
|
Domain (e.g., app.example.com):
|
|
```
|
|
- Adjust the script code to follow the workflow from `Design_Doc/Spec.md` and `Design_Doc/Operation.md`.
|
|
|
|
- Adjust the content of `Design_Doc/Spec.md` -> "Configuration" Section -> "Key Environment Variables" Section to match the current new `.env` and `.env-any-domain-com`.
|
|
- Reminder: for `.env-any-domain-com`, actually it can accept any domain format, not only "any.domain.com", it can be, eg.: "any.domain.net", "any.domain.org.hk", "sub.sub.domain.com.hk", "any.domain.hk", etc.
|
|
- Result -- 4. Code Changes (deploy-rvs-prxy.sh)
|
|
- Updated load_env() to scan for .env-* pattern (any domain format) instead of just .env-*-com
|
|
- Skips .env.development and .env.production in domain file scanning
|
|
- save_domain_env() already handles any domain format by replacing all dots with dashes
|
|
|
|
Domain File Naming Examples
|
|
|
|
┌───────────────────────┬────────────────────────────┐
|
|
│ Domain │ Filename │
|
|
├───────────────────────┼────────────────────────────┤
|
|
│ example.com │ .env-example-com │
|
|
│ sub.domain.net │ .env-sub-domain-net │
|
|
│ app.org.hk │ .env-app-org-hk │
|
|
│ sub.sub.domain.com.hk │ .env-sub-sub-domain-com-hk │
|
|
└───────────────────────┴────────────────────────────┘
|
|
|
|
- For this auto. deployment script `deploy-rvs-prxy.sh`, it has two modes to execute: 1) setup reverse proxy, such as: traefik, FRP Tunnel with traefik, 2) setup new domain into reverse proxy.
|
|
- No matter which mode, when this auto. deployment script `deploy-rvs-prxy.sh` first running, it loads `.env`, a) if missing, trigger interactive wizard, b) if `.env` exists, load its content.
|
|
- By interactive wizard to ask question or one of parameters inside `.env` to decide running mode as a) setup reverse proxy or b) setup new domain.
|
|
- For setup reverse proxy, When this auto. deployment script `deploy-rvs-prxy.sh` loads the configuration no matter `.env` or interactive wizard, if it detects the existing one is running, skip all setup processes, and let end user to manually remove the existing one in case ready need to setup one new.
|
|
- For setup new domain mode, the reverse proxy must be running, just apply the new domain into the reverse proxy.
|
|
- `.env` will be kept all reverse proxy parameters.
|
|
- `.env-my-domain-com` will be kept all new domain parameters.
|
|
- Result
|
|
┌────────────────────────────────────────┬─────────────────────┬─────────────────────────────────┐
|
|
│ Condition │ Mode │ Action │
|
|
├────────────────────────────────────────┼─────────────────────┼─────────────────────────────────┤
|
|
│ No reverse proxy exists │ Setup Reverse Proxy │ Deploys new Traefik or FRP │
|
|
│ Reverse proxy exists + DOMAIN_NAME set │ Setup New Domain │ Adds domain to existing proxy │
|
|
│ Reverse proxy exists + no DOMAIN_NAME │ Setup Reverse Proxy │ Shows warning (already running) │
|
|
└────────────────────────────────────────┴─────────────────────┴─────────────────────────────────┘
|
|
|
|
- Inside `Design_Doc/Operation.md`, it has any examples, like `./deploy-traefik.sh --help`, how do i apply into `curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-traefik.sh" | bash` (which is without any parameters) by adding `--help` parameter?
|
|
- Result
|
|
1. Code Changes (deploy-traefik.sh)
|
|
|
|
Main Function Restructure:
|
|
- Moved help/list argument checking before load_env function call
|
|
- This allows --help and --list to work without requiring .env file or triggering interactive wizard
|
|
- When no arguments provided, shows usage instead of triggering interactive setup
|
|
|
|
Usage Function Update:
|
|
- Added --help, -h and --list, -l to available commands
|
|
- Added remote execution (curl) examples:
|
|
|
|
1 curl -s "<url>/deploy-traefik.sh" | bash -s -- --help
|
|
2 curl -s "<url>/deploy-traefik.sh" | bash -s -- setup-rvs-prxy
|
|
3 curl -s "<url>/deploy-traefik.sh" | bash -s -- status
|
|
|
|
2. Documentation Updates
|
|
|
|
Design_Doc/Operations.md:
|
|
- Added new section "Using with curl (Remote Execution)" at the top of "Run this System"
|
|
- Shows all curl command examples with bash -s -- syntax
|
|
- Explains that bash -s -- allows passing arguments to a script read from stdin
|
|
- Includes examples for:
|
|
- --help - Show usage
|
|
- --list - List available systems
|
|
- setup-rvs-prxy - Run setup
|
|
- status - Check status
|
|
- logs - View logs
|
|
- Environment variable override with FRP=false
|
|
|
|
- Current situation as: i run this cmd with following issue, resolve it: `curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-traefik.sh" | bash`, then return following:
|
|
```
|
|
[ERROR] No .env file found in current directory or script directory.
|
|
[WARN] Please create an .env.development file (or .env) with your configuration.
|
|
Example .env file:
|
|
```
|
|
- I aim to the loading `.env` workflow
|
|
- guided interactive setup in case missing `.env`
|
|
- If no `.env` configuration file exists, the script will guide you through an interactive setup process.
|
|
- Simple, step-by-step configuration wizard guides users -- Answer the prompted questions about your deployment requirements. The system will ask for essential variables such as instance name and DEBUG flag.
|
|
- Provides sensible default settings
|
|
- All responses are automatically saved to a `.env` file -- All settings are saved, will be reused in subsequent runs, eliminating the need for repeated configuration.
|
|
- OR if `.env` exists, load existing single configuration file -- `.env`
|
|
- uniform configurations
|
|
- Result
|
|
1. Code Changes (deploy-traefik.sh)
|
|
Added Interactive Setup Wizard (`interactive_setup_wizard` function):
|
|
- Detects missing .env file automatically
|
|
- Guides users through step-by-step configuration:
|
|
- Step 1: Deployment mode selection (Traefik or FRP)
|
|
- Step 2: Mode-specific configuration
|
|
- Traefik Mode: Service name, port, domain, Traefik version, Let's Encrypt email
|
|
- FRP Mode: Server address, port, internal service port, instance name
|
|
- Step 3: Optional settings (debug mode)
|
|
- All responses automatically saved to .env file
|
|
- Provides sensible defaults for all settings
|
|
|
|
Modified `load_env` function:
|
|
- Instead of exiting with an error when no .env is found, it now calls the interactive wizard
|
|
- After wizard completes, sources the newly created .env file
|
|
- Continues with normal validation and initialization
|
|
|
|
2. Documentation Updates
|
|
README.md:
|
|
- Added "Interactive Setup Wizard" to Key Features
|
|
- Updated Quick Start section with two options:
|
|
- Option 1: Interactive Setup (Recommended for First Time)
|
|
- Option 2: Using Configuration File
|
|
|
|
Design_Doc/Spec.md:
|
|
- Added "Interactive Setup Wizard" to Key Capabilities
|
|
|
|
Design_Doc/Operations.md:
|
|
- Expanded Quick Start section with detailed wizard description
|
|
- Shows what questions the wizard asks
|
|
- Explains that settings are saved for future use
|
|
|
|
Design_Doc/Tech_Desc.md:
|
|
- Updated Environment Loading component description
|
|
- Added Interactive Setup Wizard Features subsection
|
|
|
|
The script now provides a user-friendly experience for first-time users while maintaining backward compatibility with existing .env configurations.
|
|
- For the content of "Key Capabilities" / "Key Features" and "Quick Start" sections in `Readme.md`
|
|
- move and merge the `Readme.md` -> "Key Capabilities" / "Key Features" content to `Design_Doc/Spec.md`.
|
|
- move and merge the `Readme.md` -> "Quick Start" content to `Design_Doc/Operations.md`.
|
|
- Keep the `Readme.md` -> "Key Capabilities" / "Key Features" section and add a reference as "refer to `Design_Doc/Spec.md` -> Key Features"
|
|
- Keep the `Readme.md` -> "Quick Start" section and add a reference as "refer to `Design_Doc/Operations.md` -> Quick Start"
|
|
|
|
## License
|
|
- I need to have license description in README.md, add a license section at the end of that file. I aim to use MIT open source license, make a general MIT description into README.md -> license section.
|
|
- Result
|
|
Key Points of MIT License:
|
|
- Permissions: Commercial use, modification, distribution, private use
|
|
- Conditions: License and copyright notice must be included
|
|
- Limitations: No liability, no warranty
|
|
- Simple and permissive: One of the most open and flexible open source licenses
|
|
|
|
The license section includes:
|
|
- Copyright notice placeholder (2026 Reverse Proxy Project)
|
|
- Full MIT License legal text
|
|
- Clear statement of permissions and limitations
|
|
- Standard formatting with code block for readability
|
|
- Choose MIT
|
|
- Permissions: Commercial use, modification, distribution, private use
|
|
- No explicit patent grant, so patent not grants everyone downstream.
|
|
|
|
## Re-structure the whole project to run at local Target computer only
|
|
|
|
- Code
|
|
- For the code `deploy-traefik.sh`, original be `auto-sys-deploy.sh`, it should be this old block diagram i mentioned before:
|
|
```
|
|
+----------------------------+
|
|
| Target Server |
|
|
| |
|
|
| +---------+ |
|
|
| | | |
|
|
| | Traefik | |
|
|
+---------------------+ | | | |
|
|
| Any Linux Computer | | +---------+ |
|
|
| | | ^ |
|
|
| +-------------+ | | | |
|
|
| | | | Setup Reverse Proxy | +----+------------------+ |
|
|
| | This +-----+------------------------+->| | |
|
|
| | Automatical | | for your existing | | Reverse Proxy Setting | |
|
|
| | System |<-+ | application | | eg. www.domain.com | |
|
|
| | | | | | | | |
|
|
| +-------------+ | | | +------+----------------+ |
|
|
| | | | | |
|
|
| .env | | v |
|
|
| | | +-------------+ |
|
|
+---------------------+ | | | |
|
|
| | Existing | |
|
|
| | Application | |
|
|
| | | |
|
|
| +-------------+ |
|
|
| |
|
|
+----------------------------+
|
|
```
|
|
i aim to change this code to follow `Design_Doc/Spec.md` -> Key Features -> Approaches -> Traefik Only -> Architecture. I do not find you have this code modification at previous actions. So, modify the code `deploy-traefik.sh` too.
|
|
- Result -- Code Changes (deploy-traefik.sh)
|
|
Architecture Change: The script now runs directly on the same server where the application is hosted, eliminating SSH-based remote operations for Traefik mode.
|
|
|
|
Key modifications:
|
|
- Removed SSH-related variables (TARGET_SERVER, TARGET_USER, SSH_PORT, SSH_KEY_FILE_NAME, etc.)
|
|
- Added local deployment variables (LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)
|
|
- Replaced ssh_exec() and scp_upload() with local_docker_exec() and local_volume_copy()
|
|
- Renamed functions to reflect local operations:
|
|
- check_app_service_on_target → check_app_service_local
|
|
- create_traefik_container_on_target → create_traefik_container_local
|
|
- configure_traefik_on_target → configure_traefik_local
|
|
- check_status_on_target → check_status_local
|
|
- view_traefik_logs → view_traefik_logs_local
|
|
- Removed the deploy command (file deployment via SSH)
|
|
- Updated usage help to reflect new environment variables
|
|
|
|
- Doc.
|
|
- I would like to move the `Readme.md` -> "Key Capabilities" section to `Design_Doc/Spec.md`.
|
|
- I would like to move the `Readme.md` -> "Quick Start" section to `Design_Doc/Operations.md`.
|
|
- In `Design_Doc/Tech_Desc.md`, i added "Technical Architecture and Implementation Details" Section and move all your previous writing under this section.
|
|
- I need to keep the `Design_Doc/Tech_Desc.md` -> "AI Prompt" section and let you un-touch, but you removed this section, You find a way to recover this section to me, and put back at the end of `Design_Doc/Tech_Desc.md`.
|