yan/rvs-prxy
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ced4f6d900
rvs-prxy/Design_Doc/Tech_Desc.md
chungyan5 ced4f6d900 Adding License
2026-02-26 16:23:19 +00:00

36 KiB
Raw Blame History

Technical Architecture and Implementation Details

Script Architecture

The deploy-rvs-prxy.sh script is an automated deployment tool supporting both FRP and Traefik modes.

Key Architecture: The script runs directly on the same server where the application is hosted (local deployment), eliminating the need for SSH-based remote operations in Traefik mode.

Deployment Modes:

  1. Setup Reverse Proxy: Deploys new Traefik or FRP Tunnel with Traefik
  2. Setup New Domain: Adds new domain configuration to existing reverse proxy

Configuration File Structure:

  • .env - Reverse proxy instance configuration (FRP mode, Traefik version, etc.)
  • .env-<domain> - Domain-specific configuration (DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)
    • Domain format: Any domain format supported (.com, .net, .org, .org.hk, .com.hk, subdomains, etc.)
    • Filename pattern: Dots replaced with dashes (e.g., app.example.com → .env-app-example-com)
  • Multiple domain files can coexist for multiple domains

Automatic Mode Detection:

  • No config files → Interactive wizard for proxy setup
  • .env exists, proxy not running → Setup Reverse Proxy
  • .env exists, proxy running, no domain file → Interactive wizard for domain setup
  • .env + .env-<domain> exists → Setup New Domain

Validation:

  • Proxy Setup Mode: Validates proxy-specific settings (TRAEFIK_VER, LETSENCRYPT_EMAIL for Traefik; FRP_SERVER_ADDR for FRP)
  • Domain Setup Mode: Validates domain-specific settings (DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)

Workflow:

First Run (No .env):

  1. Interactive wizard asks for proxy instance settings
  2. Creates .env with Traefik/FRP settings
  3. Validation checks proxy settings (TRAEFIK_VER, LETSENCRYPT_EMAIL)
  4. Deploys reverse proxy
  5. Shows message: "Next: Run the script again to setup your first domain"

Second Run (.env exists, proxy running):

  1. Detects running proxy
  2. Interactive wizard asks for domain settings
  3. Creates .env- with domain settings
  4. Validation checks domain settings (DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)
  5. Checks if application service is running
  6. Configures domain in existing reverse proxy
  7. Shows: "Service will be accessible at: https://domain.name"

Core Components

1. Environment Loading (load_env)

  • Loads configuration from .env.development, .env.production, or .env
  • Supports files in current directory or script directory
  • Interactive Setup Wizard: If no .env file is found, automatically launches a guided setup wizard
  • Normalizes boolean values (FRP variable)
  • Validates required parameters for each mode

Interactive Setup Wizard Features:

  • Step-by-step guided configuration
  • Mode selection (Traefik or FRP)
  • Mode-specific configuration prompts
  • Sensible defaults for all settings
  • Automatic saving to .env file for future runs

2. Instance Management (prompt_instance_name)

  • Auto-detects existing instances from Docker volumes (FRP mode)
  • Supports instance name override via INSTANCE_NAME environment variable
  • Generates timestamped default names
  • Saves selections to .env for future runs

3. Docker Network Selection (select_docker_network)

  • Lists available Docker networks
  • Supports custom network names
  • Remembers previous selections via .para file in volume (FRP mode)

4. Configuration Generation

  • FRP Mode: Generates frpc.toml with dynamic proxy configurations
  • Traefik Mode: Generates YAML configuration files for routing rules (local deployment)

5. Container Management

  • Creates and manages Docker containers with persistent volumes
  • Supports container restart and lifecycle operations
  • Displays operation commands for user reference

Traefik Mode Implementation (Local Deployment)

Setup Flow (setup_traefik_only)

  1. Pre-request Checks

    • Verify Docker command permissions

  2. Application Service Verification (check_app_service_local)

    • Confirms target service is running locally
    • Verifies connection to traefik-public network

  3. Traefik Container Creation (create_traefik_container_local)

    • Creates traefik_data volume for persistence
    • Generates dynamic configuration with:
      • Dashboard routing
      • HTTP to HTTPS redirect
      • Security headers
    • Creates traefik-public Docker network
    • Uses Docker Compose for container orchestration
    • Detects Docker version for command compatibility (docker compose vs docker-compose)

  4. Service Configuration (configure_traefik_local)

    • Generates service-specific routing rules
    • Supports sub-path routing (e.g., example.com/api)
    • Creates unique configuration filenames to avoid conflicts
    • Supports dynamic configuration loading (no restart required by default)

Local Docker Operations

  • local_docker_exec(): Executes Docker commands directly on the local server
  • local_volume_copy(): Copies files to Docker volumes using temporary containers

Configuration File Structure

Traefik Main Config (traefik.yml):

http:
  routers:
    api:
      rule: "PathPrefix(`/api`)"
      service: api@internal
    dashboard:
      rule: "PathPrefix(`/dashboard`)"
      service: api@internal
    http-catchall:
      rule: "PathRegexp(`{any:.*}`)"
      entryPoints:
        - "web"
      service: "noop@internal"
      middlewares:
        - "redirect-to-https"
  middlewares:
    api-headers:
      headers:
        customFrameOptionsValue: SAMEORIGIN
        contentTypeNosniff: true
        browserXssFilter: true
        stsIncludeSubdomains: true
        stsPreload: true
        stsSeconds: 15552000
    redirect-to-https:
      redirectScheme:
        scheme: "https"
        permanent: true

Service Config (dynamic, per-service):

http:
  routers:
    <service-name>-https:
      rule: 'Host(`<domain>`)'
      service: <service-name>-service
      tls:
        certResolver: letsencrypt
      entryPoints:
        - websecure
    <service-name>-http:
      rule: 'Host(`<domain>`)'
      service: <service-name>-service
      entryPoints:
        - web
      middlewares:
        - redirect-to-https
  services:
    <service-name>-service:
      loadBalancer:
        servers:
          - url: 'http://<service-name>:<port>'
        passHostHeader: true

FRP Mode Implementation

Setup Flow

  1. Instance Setup: Prompt for instance name
  2. Port Configuration: Prompt for internal service port
  3. FRP Config Generation (generate_frpc_config)
    • Extracts existing configuration from volume
    • Supports dynamic proxy configurations via PROXY_*_PORT variables
    • Generates frpc.toml with TCP proxy rules
  4. Container Start (start_docker_container)
    • Creates volume if not exists
    • Starts frpc container with configuration mounted
  5. Proxy Server Update (update_proxy_server_config)
    • Uploads dynamic configuration script to proxy server
    • Updates docker-compose.app.yml with port mappings and labels
    • Supports domain-based routing configuration

Dynamic Proxy Configuration

The script supports dynamic proxy configurations through environment variables:

  • PROXY_<NAME>_PORT: Defines remote port for proxy
  • PROXY_<NAME>_LOCAL_PORT: Defines local port (defaults to INTERNAL_SERVICE_PORT)

Example:

PROXY_WEB_PORT=12077
PROXY_WEB_LOCAL_PORT=3000
PROXY_SSH_PORT=2222
PROXY_SSH_LOCAL_PORT=22

Proxy Server Configuration Update

The script generates and executes a remote script on the proxy server that:

  • Checks existing configuration status (not_found, up_to_date, outdated)
  • Updates port mappings section in docker-compose.app.yml
  • Updates labels section for Traefik routing
  • Optionally restarts Docker Compose service

File Deployment (Traefik Mode)

The deploy command syncs files from local folder to target server:

  • Source: LOCAL_FOLDER (default: ../out/)
  • Destination: DEST_PATH on target server
  • Uses rsync for efficient synchronization with --delete option

Logging and Debugging

Logging Functions:

  • log_info(): Green [INFO] messages
  • log_error(): Red [ERROR] messages
  • log_warn(): Yellow [WARN] messages
  • log_debug(): Blue [DEBUG] messages (only when DEBUG=true)

Status Commands:

  • check_status_on_target(): Shows Traefik and Application service status
  • view_traefik_logs(): Displays last 50 lines of Traefik logs

Error Handling

  • Uses set -e for immediate exit on errors
  • Validates required parameters before execution
  • Provides detailed error messages with suggested fixes
  • Graceful handling of missing configurations

Version Compatibility

Docker Version Detection:

  • Detects Docker version to determine command syntax
  • Uses docker compose for Docker 20.10.0+
  • Falls back to docker-compose for older versions
  • Handles Compose file version field (deprecated in v2.0+)

Traefik Version:

  • Default: v3.6.9
  • Configurable via TRAEFIK_VER environment variable

AI Prompt

  • The content is organised into distinct sections according to the topics below. (Grouped by section)
  • Messages are sorted chronologically, with the most recent at the top and the oldest at the bottom. (Sorted by date: newest first, oldest last.)

AI Prompt habit as a reminder

  • Refer to Design_Doc/instructions.md

General Todos

  • .env for
    • INSTANCE_NAME, not fixing the traefik
    • not fixing of docker network name as traefik_public

Workflow

  • in scenario of proxy running, no matter have or not have .env-<domain>, it will execute the "Add domain" task. However, one of domain, eg. my.domain.com, has already added into reverse proxy instance, this command curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash is executed again, does it re-insert the same command into reverse proxy instance? Let me the current logic, and update into the Design_Doc/Operation.md if does not has this description before.

    • Result -- Design_Doc/Operations.md -> section: "Re-running for Existing Domain"

  • i am in Scenario 1: .env exists, proxy running, no .env-<domain>, the logic should be: Action: Starts interactive wizard for domain setup. However, the current script code running as:

    curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
[INFO] Loading reverse proxy config from .env
[INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
[ERROR] DOMAIN_NAME is required for domain setup mode
[ERROR] Please set DOMAIN_NAME in your .env-<domain> file

    • adjust the code to right logic.

    • Result

      1. Code Fix (deploy-rvs-prxy.sh)

      Problem:

      • When .env exists, proxy is running, but no .env- exists
      • Script detected DEPLOY_MODE="domain" and tried to validate domain settings
      • Validation failed because domain settings don't exist yet (need wizard)

      Solution: Added new domain_wizard mode

      New Logic:

      1 if domain_env_loaded → domain mode (validate & execute) 2 elif proxy_env_loaded: 3 if proxy running → domain_wizard mode (start wizard, no validation) 4 else → proxy mode 5 else → wizard

      Changes Made:

      1. load_env() function:

        • Changed DEPLOY_MODE="domain" to DEPLOY_MODE="domain_wizard" when proxy exists but no domain config
        • Added conditional validation: skip validation for domain_wizard mode
        • Added comment explaining wizard will collect required values

      2. main() function:

        • Added elif [ "$DEPLOY_MODE" = "domain_wizard" ] branch
        • Calls interactive_setup_wizard() to collect domain settings
        • Sources the newly created domain config file
        • Then calls setup_new_domain() to configure it

      3. Workflow Now

      Scenario 1: .env exists, proxy running, no .env-<domain>

      1 [INFO] Loading reverse proxy config from .env 2 [INFO] Deployment mode: Setup New Domain (proxy running, no domain config) 3 [INFO] Starting interactive wizard for domain setup... 4 [Wizard runs and creates .env-]) 5 [Domain configured successfully]

      Scenario 2: .env-<domain> exists

      1 [INFO] Loading domain config from .env- 2 [INFO] Deployment mode: Setup New Domain (found domain config) 3 [INFO] Setting up new domain in existing reverse proxy... 4 [Domain configured successfully]

      Scenario 3: No config files

      1 [INFO] No configuration file found. 2 [Wizard runs for proxy setup] 3 [Proxy deployed]

  • For "Second Run", the Reverse Proxy Instance should be running.

    • Currently, if .env exists, it shows this err.:

      curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
[INFO] Loading reverse proxy config from .env
[INFO] Deployment mode: Setup New Domain (proxy running, no domain config)
[ERROR] DOMAIN_NAME is required for domain setup mode
[ERROR] Please set DOMAIN_NAME in your .env-<domain> file
      • i find the script will read .env as the .env-<domain>, so adjust the code as recognizing .env-* only, not .env, .env usually be kept there for configuration of Reverse Proxy Instance only.

    • Currently, if .env missing or should be right as .env-<domain> missing, it shows this err.:

      curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash
[INFO] No configuration file found.
=============================================
Welcome to Deploy Reverse Proxy Setup Wizard
=============================================

Existing reverse proxy (Traefik) detected.

--- Setup New Domain ---
Let's configure a new domain for your existing reverse proxy.

Enter the domain name for this service:
Domain (e.g., app.example.com): event.cgu.org.hk
Enter your Docker application container name:
Service name (e.g., my-app): cgu-react-client
Enter your application's internal port:
Service port (default: 3000):
[INFO] Saving domain configuration to .env-event-cgu-org-hk
[INFO] Domain configuration saved to .env-event-cgu-org-hk
=============================================
Setup Complete!
Domain configuration saved to .env-event-cgu-org-hk
=============================================

You can edit these settings later in the configuration file.

main: line 130: .env: No such file or directory
      • Improve the code to resolve this issue.

    • Result

      1. Code Fixes (deploy-rvs-prxy.sh)

      Issue 1: .env being recognized as domain config

      • Root cause: The domain detection logic didn't properly distinguish between .env and .env-* files
      • Fix: Changed the logic to check for domain_env_loaded first, which only gets set when a .env-* file is found (not .env)

      Issue 2: "No such file or directory" error when sourcing .env

      • Root cause: When proxy exists but .env is missing, the wizard creates only .env-, then tries to source .env which doesn't exist
      • Fix:
        • In interactive_setup_wizard(): Only source .env if it exists, otherwise set default FRP=false
        • In load_env(): Source the correct file based on deployment mode (.env for proxy, DOMAIN_ENV_FILE for domain)
      1. Updated Logic Flow

      Before:

      1 if proxy_env_loaded AND domain_env_loaded → domain mode 2 elif proxy_env_loaded → check proxy → domain/proxy mode 3 else → wizard → source .env → proxy mode

      After:

      1 if domain_env_loaded → domain mode 2 elif proxy_env_loaded → check proxy → domain/proxy mode 3 else → wizard → source correct file (.env or .env-) → appropriate mode

      1. Behavior Now

      Scenario 1: .env exists, proxy running, no .env-<domain>

      • Detects: DEPLOY_MODE="domain"
      • Message: "Setup New Domain (proxy running, no domain config)"
      • Action: Starts interactive wizard for domain setup
      • Creates: .env- file
      • No error about missing DOMAIN_NAME

      Scenario 2: Proxy running, no .env, no .env-<domain>

      • Detects: No config files
      • Action: Starts interactive wizard for domain setup
      • Creates: .env- file only
      • Sources: .env- (not .env)
      • No "No such file or directory" error

  • After "First Run" to Setup Reverse Proxy Instance with Interactive wizard, it show the following issue:

    --- Step 3: Setup Complete ---

Reverse proxy instance configuration saved to .env
Next: Run the script again to setup your first domain.

=============================================
Setup Complete!
Configuration saved to .env
=============================================

You can edit these settings later in the configuration file.

[INFO] Deployment mode: Setup Reverse Proxy (interactive setup)
[INFO] Setting up reverse proxy...
[INFO] Setting up reverse proxy...
[INFO] Setting up Traefik reverse proxy...
[INFO] Setting up Traefik-only proxy for instance:
[PRE-REQUEST] Make sure your current user has permission to execute docker command.

Auto-proceeding with Traefik setup...

[INFO] Checking if Application Service is running locally...
[ERROR] Application Service is not running locally:
[ERROR] Application Service not found locally. Please ensure the service '' is running.

    • For the "First Run", it does not need to handle the Application Service issue, but It should be task of "setup domain". So adjust the code to right workflow following Design_Doc/Spec.md and Design_Doc/Operation.md.

    • Result -- Code Fix (deploy-rvs-prxy.sh)

      setup_traefik_only() function:

      • Removed application service check (check_app_service_local)
      • Removed call to configure_traefik_local (domain configuration)
      • Now only deploys the Traefik reverse proxy instance
      • Shows message: "Next: Run the script again to setup your first domain"

      setup_new_domain() function:

      • Added application service check (check_app_service_local)
      • Added call to configure_traefik_local (domain configuration)
      • Properly validates that application is running before configuring domain

  • After "First Run" to Setup Reverse Proxy Instance with Interactive wizard, it show the following issue:

    --- Step 3: Setup Complete ---

Reverse proxy instance configuration saved to .env
Next: Run the script again to setup your first domain.

=============================================
Setup Complete!
Configuration saved to .env
=============================================

You can edit these settings later in the configuration file.

[INFO] Deployment mode: Setup Reverse Proxy (interactive setup)
[ERROR] LOCAL_SERVICE_NAME and LOCAL_SERVICE_PORT are required for proxy setup
[ERROR] Please set these in your .env file

    • The script code is running into setup domain which is not right at current workflow, the "setup domain" should be at "Second Run" to Setup New Domain, so adjust the code to right workflow following Design_Doc/Spec.md and Design_Doc/Operation.md.

    • Result -- Code Fix (deploy-rvs-prxy.sh)

      Fixed Validation Logic in load_env() function:

      Before (Incorrect):

      • Proxy setup mode was validating LOCAL_SERVICE_NAME and LOCAL_SERVICE_PORT (domain-specific settings)
      • This caused the error after first-time setup wizard completed

      After (Correct):

      • Proxy Setup Mode validates proxy-specific settings:
        • Traefik Mode: TRAEFIK_VER, LETSENCRYPT_EMAIL
        • FRP Mode: FRP_SERVER_ADDR
      • Domain Setup Mode validates domain-specific settings:
        • DOMAIN_NAME, LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT

  • Modify the workflow of the script as following the Design_Doc/Spec.md -> "Key Features" Section and its sub-section "Workflow". Result -- 3. Code Changes

    load_env() function:

    • Loads .env for reverse proxy configuration
    • Scans for .env-*-com files for domain configuration
    • Automatically determines deployment mode based on files found

    save_domain_env() function (new):

    • Creates domain-specific configuration files
    • Converts domain names to filename format (your-domain-com)

    interactive_setup_wizard() function:

    • Detects existing reverse proxy
    • If proxy exists: guides through domain setup, creates .env-*-com
    • If no proxy: guides through proxy setup, creates .env

    setup_new_domain() function:

    • Reports which domain configuration file was loaded

Cmd structure

  • I aim this auto. deployment script with available OPTIONS to form different functions
    • Rename deploy-traefik.sh to deploy-rvs-prxy.sh.
    • Remove the following: 1) ./deploy-traefik.sh setup-rvs-prxy, 2) FRP=false ./deploy-traefik.sh setup-rvs-prxy 3) FRP=true ./deploy-traefik.sh setup-rvs-prxy. Just simple cmd as curl -s "https://your.domain.com/your/path/deploy-rvs-prxy.sh" | bash, then load the .env, if missing, triggering interactive wizard or if existing, following the .env. These both methods include ask the mode of a) traefik as FRP=false ... or b) FRP tunnel as FRP=true .... So using interactive wizard approache or .env to replace the CLI with parameters to select mode.

.env

  • in scenario of proxy running, no matter have or not have .env-<domain>, it will execute the "Add domain" task. However, one of domain, eg. my.domain.com, has already added into reverse proxy instance, this command curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-rvs-prxy.sh" | bash is executed again, does it re-insert the same command into reverse proxy instance? Let me the current logic, and update into the Design_Doc/Operation.md if does not has this description before.

  • I am in the situation as 1) No reverse proxy exists, 2) no .env, 3) no .env-<domain-with-dashes>, it is right that go into Interactive wizard. In this situation, it should be "Setup Reverse Proxy", so the Interactive wizard is only handle the Reverse Proxy instance Configuration, and finally save those configuration into .env. No any Domain related Configuration. However, currently the script handle the Interactive wizard to show the following which is Domain configuation related:

    --- Step 2: Traefik Configuration ---

Enter your Docker application container name:
Service name (e.g., my-app): traefik

Enter your application's internal port:
Service port (default: 3000):

Enter the domain name for your service:
Domain (e.g., app.example.com):
    • Adjust the script code to follow the workflow from Design_Doc/Spec.md and Design_Doc/Operation.md.

  • Adjust the content of Design_Doc/Spec.md -> "Configuration" Section -> "Key Environment Variables" Section to match the current new .env and .env-any-domain-com.

  • Reminder: for .env-any-domain-com, actually it can accept any domain format, not only "any.domain.com", it can be, eg.: "any.domain.net", "any.domain.org.hk", "sub.sub.domain.com.hk", "any.domain.hk", etc.

    • Result -- 4. Code Changes (deploy-rvs-prxy.sh)

      • Updated load_env() to scan for .env-* pattern (any domain format) instead of just .env-*-com
      • Skips .env.development and .env.production in domain file scanning
      • save_domain_env() already handles any domain format by replacing all dots with dashes

      Domain File Naming Examples

      ┌───────────────────────┬────────────────────────────┐ │ Domain │ Filename │ ├───────────────────────┼────────────────────────────┤ │ example.com │ .env-example-com │ │ sub.domain.net │ .env-sub-domain-net │ │ app.org.hk │ .env-app-org-hk │ │ sub.sub.domain.com.hk │ .env-sub-sub-domain-com-hk │ └───────────────────────┴────────────────────────────┘

  • For this auto. deployment script deploy-rvs-prxy.sh, it has two modes to execute: 1) setup reverse proxy, such as: traefik, FRP Tunnel with traefik, 2) setup new domain into reverse proxy.

    • No matter which mode, when this auto. deployment script deploy-rvs-prxy.sh first running, it loads .env, a) if missing, trigger interactive wizard, b) if .env exists, load its content.
    • By interactive wizard to ask question or one of parameters inside .env to decide running mode as a) setup reverse proxy or b) setup new domain.
    • For setup reverse proxy, When this auto. deployment script deploy-rvs-prxy.sh loads the configuration no matter .env or interactive wizard, if it detects the existing one is running, skip all setup processes, and let end user to manually remove the existing one in case ready need to setup one new.
    • For setup new domain mode, the reverse proxy must be running, just apply the new domain into the reverse proxy.
    • .env will be kept all reverse proxy parameters.
    • .env-my-domain-com will be kept all new domain parameters.
    • Result ┌────────────────────────────────────────┬─────────────────────┬─────────────────────────────────┐ │ Condition │ Mode │ Action │ ├────────────────────────────────────────┼─────────────────────┼─────────────────────────────────┤ │ No reverse proxy exists │ Setup Reverse Proxy │ Deploys new Traefik or FRP │ │ Reverse proxy exists + DOMAIN_NAME set │ Setup New Domain │ Adds domain to existing proxy │ │ Reverse proxy exists + no DOMAIN_NAME │ Setup Reverse Proxy │ Shows warning (already running) │ └────────────────────────────────────────┴─────────────────────┴─────────────────────────────────┘

  • Inside Design_Doc/Operation.md, it has any examples, like ./deploy-traefik.sh --help, how do i apply into curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-traefik.sh" | bash (which is without any parameters) by adding --help parameter?

    • Result

      1. Code Changes (deploy-traefik.sh)

      Main Function Restructure:

      • Moved help/list argument checking before load_env function call
      • This allows --help and --list to work without requiring .env file or triggering interactive wizard
      • When no arguments provided, shows usage instead of triggering interactive setup

      Usage Function Update:

      • Added --help, -h and --list, -l to available commands
      • Added remote execution (curl) examples:

      1 curl -s "/deploy-traefik.sh" | bash -s -- --help 2 curl -s "/deploy-traefik.sh" | bash -s -- setup-rvs-prxy 3 curl -s "/deploy-traefik.sh" | bash -s -- status

      1. Documentation Updates

      Design_Doc/Operations.md:

      • Added new section "Using with curl (Remote Execution)" at the top of "Run this System"
      • Shows all curl command examples with bash -s -- syntax
      • Explains that bash -s -- allows passing arguments to a script read from stdin
      • Includes examples for:
        • --help - Show usage
        • --list - List available systems
        • setup-rvs-prxy - Run setup
        • status - Check status
        • logs - View logs
        • Environment variable override with FRP=false

  • Current situation as: i run this cmd with following issue, resolve it: curl -s "https://www.ivantito.com/app-pub/demos/test/deploy-traefik.sh" | bash, then return following:

    [ERROR] No .env file found in current directory or script directory.
[WARN] Please create an .env.development file (or .env) with your configuration.
Example .env file:

    • I aim to the loading .env workflow

      • guided interactive setup in case missing .env
        • If no .env configuration file exists, the script will guide you through an interactive setup process.
        • Simple, step-by-step configuration wizard guides users -- Answer the prompted questions about your deployment requirements. The system will ask for essential variables such as instance name and DEBUG flag.
        • Provides sensible default settings
        • All responses are automatically saved to a .env file -- All settings are saved, will be reused in subsequent runs, eliminating the need for repeated configuration.
      • OR if .env exists, load existing single configuration file -- .env
        • uniform configurations

    • Result

      1. Code Changes (deploy-traefik.sh) Added Interactive Setup Wizard (interactive_setup_wizard function):
      • Detects missing .env file automatically
      • Guides users through step-by-step configuration:
        • Step 1: Deployment mode selection (Traefik or FRP)
        • Step 2: Mode-specific configuration
          • Traefik Mode: Service name, port, domain, Traefik version, Let's Encrypt email
          • FRP Mode: Server address, port, internal service port, instance name
        • Step 3: Optional settings (debug mode)
      • All responses automatically saved to .env file
      • Provides sensible defaults for all settings

      Modified load_env function:

      • Instead of exiting with an error when no .env is found, it now calls the interactive wizard
      • After wizard completes, sources the newly created .env file
      • Continues with normal validation and initialization
      1. Documentation Updates README.md:
      • Added "Interactive Setup Wizard" to Key Features
      • Updated Quick Start section with two options:
        • Option 1: Interactive Setup (Recommended for First Time)
        • Option 2: Using Configuration File

      Design_Doc/Spec.md:

      • Added "Interactive Setup Wizard" to Key Capabilities

      Design_Doc/Operations.md:

      • Expanded Quick Start section with detailed wizard description
      • Shows what questions the wizard asks
      • Explains that settings are saved for future use

      Design_Doc/Tech_Desc.md:

      • Updated Environment Loading component description
      • Added Interactive Setup Wizard Features subsection

      The script now provides a user-friendly experience for first-time users while maintaining backward compatibility with existing .env configurations.

    • For the content of "Key Capabilities" / "Key Features" and "Quick Start" sections in Readme.md

      • move and merge the Readme.md -> "Key Capabilities" / "Key Features" content to Design_Doc/Spec.md.
      • move and merge the Readme.md -> "Quick Start" content to Design_Doc/Operations.md.
      • Keep the Readme.md -> "Key Capabilities" / "Key Features" section and add a reference as "refer to Design_Doc/Spec.md -> Key Features"
      • Keep the Readme.md -> "Quick Start" section and add a reference as "refer to Design_Doc/Operations.md -> Quick Start"

License

  • I need to have license description in README.md, add a license section at the end of that file. I aim to use MIT open source license, make a general MIT description into README.md -> license section.

    • Result Key Points of MIT License:

      • Permissions: Commercial use, modification, distribution, private use
      • Conditions: License and copyright notice must be included
      • Limitations: No liability, no warranty
      • Simple and permissive: One of the most open and flexible open source licenses

      The license section includes:

      • Copyright notice placeholder (2026 Reverse Proxy Project)
      • Full MIT License legal text
      • Clear statement of permissions and limitations
      • Standard formatting with code block for readability

    • Choose MIT

      • Permissions: Commercial use, modification, distribution, private use
      • No explicit patent grant, so patent not grants everyone downstream.

Re-structure the whole project to run at local Target computer only

  • Code

    • For the code deploy-traefik.sh, original be auto-sys-deploy.sh, it should be this old block diagram i mentioned before: 
                                                    +----------------------------+
                                              | Target Server              |
                                              |                            |
                                              |    +---------+             |
                                              |    |         |             |
                                              |    | Traefik |             |
+---------------------+                        |    |         |             |
| Any Linux Computer  |                        |    +---------+             |
|                     |                        |       ^                    |
| +-------------+     |                        |       |                    |
| |             |     |  Setup Reverse Proxy   |  +----+------------------+ |
| | This        +-----+------------------------+->|                       | |
| | Automatical |     |  for your existing     |  | Reverse Proxy Setting | |
| | System      |<-+  |  application           |  | eg. www.domain.com    | |
| |             |  |  |                        |  |                       | |
| +-------------+  |  |                        |  +------+----------------+ |
|                  |  |                        |         |                  |
|                .env |                        |         v                  |
|                     |                        |     +-------------+        |
+---------------------+                        |     |             |        |
                                              |     | Existing    |        |
                                              |     | Application |        |
                                              |     |             |        |
                                              |     +-------------+        |
                                              |                            |
                                              +----------------------------+
      i aim to change this code to follow Design_Doc/Spec.md -> Key Features -> Approaches -> Traefik Only -> Architecture. I do not find you have this code modification at previous actions. So, modify the code deploy-traefik.sh too.

      • Result -- Code Changes (deploy-traefik.sh) Architecture Change: The script now runs directly on the same server where the application is hosted, eliminating SSH-based remote operations for Traefik mode.

        Key modifications:

        • Removed SSH-related variables (TARGET_SERVER, TARGET_USER, SSH_PORT, SSH_KEY_FILE_NAME, etc.)
        • Added local deployment variables (LOCAL_SERVICE_NAME, LOCAL_SERVICE_PORT)
        • Replaced ssh_exec() and scp_upload() with local_docker_exec() and local_volume_copy()
        • Renamed functions to reflect local operations:
          • check_app_service_on_target → check_app_service_local
          • create_traefik_container_on_target → create_traefik_container_local
          • configure_traefik_on_target → configure_traefik_local
          • check_status_on_target → check_status_local
          • view_traefik_logs → view_traefik_logs_local
        • Removed the deploy command (file deployment via SSH)
        • Updated usage help to reflect new environment variables

  • Doc.

    • I would like to move the Readme.md -> "Key Capabilities" section to Design_Doc/Spec.md.
    • I would like to move the Readme.md -> "Quick Start" section to Design_Doc/Operations.md.
    • In Design_Doc/Tech_Desc.md, i added "Technical Architecture and Implementation Details" Section and move all your previous writing under this section.
    • I need to keep the Design_Doc/Tech_Desc.md -> "AI Prompt" section and let you un-touch, but you removed this section, You find a way to recover this section to me, and put back at the end of Design_Doc/Tech_Desc.md.